[c-nsp] 100 meg throughput

[Paul Stewart]

Thanks for the reply... So what is typical of an ISP to see for 100 meg FE?  Of course, I realize this is traffic dependant... Just looking for general experiences with this...

Paul
 

-----Original Message-----
From: Joe Shen [mailto:sj_hznm at yahoo.com.cn] 
Sent: Monday, December 12, 2005 9:12 PM
To: Paul Stewart; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 100 meg throughput

To our measurement with Smartbit, throughput of FE veries with packet size. With 64Byte packet, it could only reach 67Mbps or so; with 1500Byte packet, it could reach much close to 100Mbps. 

The same result with GE.

Joe 


--- Paul Stewart <pstewart at nexicomgroup.net>:

> Hi everyone...
> 
> I realize this is a loaded question with many variables but here 
> goes....
> 
> How much throughput should we expect to see on a copper FastE 
> connection?  This connection is used to backhaul Internet traffic and 
> is starting to hit the 80 meg mark on occasion....
> 
> Thanks in advance,
> 
> Paul Stewart
> IP Routing/Switching
> Nexicom Inc.
> http://www.nexicom.net
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at
> http://puck.nether.net/pipermail/cisco-nsp/
> 


__________________________________________________
赶快注册雅虎超大容量免费邮箱?
http://cn.mail.yahoo.com