[c-nsp] 100 meg throughput

[Alex Rubenstein]

int x/y
  load 30

   30 second input rate 191000 bits/sec, 151 packets/sec
   30 second output rate 6000 bits/sec, 1 packets/sec




On Wed, 14 Dec 2005, Jeff Kell wrote:

> Jared Mauch wrote:
>
>> 	I really wish Cisco would make better counters available on this
>> (like you can see on a Juniper, the stats are not weighted over 300
>> seconds).
>>
> They sort of did with CatOS... 'show traffic' would give you peaks (and
> timestamps) on the backplane segments.  But I don't recall the interval
> the peak refers to.
>
> Jeff
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

-- 
Alex Rubenstein, AR97, K2AHR, alex at nac.net, latency, Al Reuben
Net Access Corporation, 800-NET-ME-36, http://www.nac.net