[c-nsp] Dialup with MPLS

[Jon Lewis]

On Fri, 16 Dec 2005, Nick Shah wrote:

> I am assuming you want to put the dialup user in a VRF
>
> If so, 2 ways to do it
>
> - your NAS is configured as the PE, where upon DIALUP & authentication,
> RADIUS sends VRF attributes and puts the user in appropriate VRF
> - or deploy VPDN, and L2TP multihop from the NAS to LNS (which is a PE)
> and have radius send VRF attributes to put into a VRF.

I briefly looked into doing this some time ago, and IIRC, there were no 
AS5300 (would have been for 5396 or 53192) IOS versions that supported 
MPLSVPN.  Has that changed?

----------------------------------------------------------------------
  Jon Lewis                   |  I route
  Senior Network Engineer     |  therefore you are
  Atlantic Net                |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________