[c-nsp] Problem configuring Control Plane Policing (CoPP) on 7200VXR in 12.4

[Rodney Dunn]

Can you try 12.4(4)T and see if you see the same problem?

Some things I've looked at seem to imply we didn't support
named ACL's for some CoPP configurations until later code.
Not sure what the logic was there..

Rodney

On Wed, Dec 21, 2005 at 12:32:10PM +0100, Johannes Resch wrote:
> Hi,
> 
> According to cisco's release notes and feature navigator, IOS 12.4 should
> include CoPP features.
> I started to build a test setup on a 7204VXR (NPE-G1) and 12.4(3b), usinge
> the image c7200-pk9u2-mz.124-3b.bin ("SERVICE PROVIDER IPSEC 3DES LAWFUL
> INTERCEPT").
> 
> I configured extended IP ACLs and classes, based upon the cisco CoPP
> whitepaper.
> (http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/products_white_paper09186a0080211f39.shtml)
> 
> But, as soon as I try to actually assign the policy-map, I get:
> 
> router(config-cp)#service-policy input COPP-POLICY
> 'match access-group name' not supported on control-plane
> error: failed to install policy map COPP-POLICY
> 
> Am I missing anything here?
> 
> Regards,
> -jr
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/