[c-nsp] Attaching channel-group to an interface

[james edwards]

I have a MC-4T1 card in a 7206, how do I attach channel-group 0 to
Serial4/1:0 ?


!
controller T1 4/1
 framing esf
 clock source internal
 linecode b8zs
 channel-group 0 timeslots 1-18
 channel-group 1 timeslots 19-24


!
interface Serial4/1:0
 description Hardware
 ip address
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 encapsulation frame-relay IETF
 ip mroute-cache
 no fair-queue
 no clns route-cache

James
Routing and Security Administrator
At the Santa Fe Office: Cyber Mesa Telecom
jamesh at cybermesa.com  noc at cybermesa.com
http://www.cybermesa.com/ContactCM