[c-nsp] ISDN Dialin RADIUS

Wed Feb 2 03:31:54 EST 2005

Hi Oliver & Dennis,

thanks, the Virtual-profile was the key!!!
Now it works, as far as i can see!!
Yes, it was a new debug-output.

Question:
Do I have to use Virtual-profile. And what is it exactly, any 
documentation-hints?

Thanks a lot
Florian

Oliver Boehmer (oboehmer) wrote:

>Florian,
>
>can you please add virtual-profile configuration and try again?
>
>virtual-profile virtual-template 1
>interface Virtual-template 1
> ip unnumbered Loopback0
> encapsulation ppp
> peer default ip address pool setup_pool
> ppp authentication pap
>
>The call fails as the router tries to terminate it on a virtual-access
>interface, but due to the missing virtual-template config, the
>virtual-access interface has no network protocol config (in particular
>no IP config), and all NCP attempts fail.   
>
>	oli
>
>P.S: This is a different debug than the one you sent originally..
>
>Florian Prester <> wrote on Wednesday, February 02, 2005 9:00 AM:
>
>  
>
>>Hi,
>>YES, the RADIUS is assigning IP addresses for all users.
>>
>>#######################################################
>>following-Config:
>>
>>current configuration : 8815 bytes
>>!
>>! Last configuration change at 08:35:57 MET Wed Feb 2 2005 by @admin
>>! NVRAM config last updated at 12:15:36 MET Tue Feb 1 2005 by @admin
>>!
>>version 12.3
>>service timestamps debug datetime msec
>>service timestamps log datetime msec localtime show-timezone
>>service password-encryption
>>service linenumber
>>!
>>hostname modem-i1
>>!
>>boot-start-marker
>>boot system flash flash:c3725-ipbase-mz.123-10.bin
>>boot-end-marker
>>!
>>card type e1 1
>>logging buffered 512000 debugging
>>!
>>clock timezone MET 1
>>clock summer-time MET recurring last Sun Mar 2:00 last Sun Oct 3:00
>>modem country mica germany
>>aaa new-model
>>!
>>!
>>aaa authentication login default group radius local none
>>aaa authentication enable default enable line none
>>aaa authentication ppp default if-needed group radius
>>aaa authorization exec default group radius local
>>aaa authorization network default group radius none
>>aaa accounting delay-start
>>aaa accounting exec default start-stop group radius
>>aaa accounting network default start-stop group radius
>>aaa accounting system default start-stop group radius
>>aaa session-id common
>>ip subnet-zero
>>no ip source-route
>>ip cef
>>isdn switch-type primary-net5
>>isdn logging
>>!
>>chat-script offhook "" "ATH1" OK
>>chat-script callback ABORT ERROR ABORT BUSY "" "ATDT\T" TIMEOUT 60
>>"CONNECT" \C
>>!
>>!
>>controller E1 1/0
>>pri-group timeslots 1-31
>>!
>>!
>>interface Loopback0
>>ip address 192.44.86.6 255.255.255.255
>>!
>>interface FastEthernet0/1
>>ip address 192.44.86.36 255.255.255.224
>>ip access-group 101 out
>>ip mask-reply
>>ip directed-broadcast 3
>>no ip proxy-arp
>>ip pim sparse-dense-mode
>>ip multicast ttl-threshold 16
>>no ip route-cache cef
>>no ip route-cache
>>ip cgmp
>>no ip mroute-cache
>>ip ospf cost 1
>>duplex auto
>>speed auto
>>!
>>interface Serial1/0:15
>>ip unnumbered Loopback0
>>ip pim sparse-mode
>>encapsulation ppp
>>dialer idle-timeout 6000
>>dialer-group 1
>>isdn switch-type primary-net5
>>isdn incoming-voice modem
>>isdn skip-async-callerid-check
>>no peer default ip address
>>no keepalive
>>no cdp enable
>>ppp authentication pap
>>ppp multilink
>>!
>>interface Group-Async0
>>ip unnumbered Loopback0
>>encapsulation ppp
>>ip tcp header-compression
>>dialer in-band
>>dialer idle-timeout 6000
>>async mode interactive
>>peer default ip address pool setup_pool
>>ppp authentication pap
>>group-range 65 94
>>!
>>router ospf 1
>>log-adjacency-changes
>>redistribute connected subnets
>>redistribute static subnets
>>network 10.8.0.0 0.0.255.255 area 0.0.0.0
>>network 192.44.86.32 0.0.0.31 area 0.0.0.0
>>!
>>ip local pool setup-pool 172.16.21.1 172.16.21.30
>>ip default-gateway 192.44.86.34
>>ip classless
>>ip default-network 0.0.0.0
>>ip route 0.0.0.0 0.0.0.0 192.44.86.35
>>ip route 0.0.0.0 0.0.0.0 192.44.86.34 150
>>ip route 0.0.0.0 0.0.0.0 Null0 200
>>ip route 192.44.83.24 255.255.255.248 192.44.82.78
>>ip route 192.44.83.40 255.255.255.248 192.44.82.140
>>ip route 192.44.83.48 255.255.255.248 192.44.82.48
>>ip route 192.44.83.56 255.255.255.248 192.44.82.35
>>ip route 192.44.90.0 255.255.255.0 192.44.82.11
>>no ip http server
>>ip pim accept-rp auto-rp
>>ip ospf name-lookup
>>line con 0
>>line 65 94
>>script modem-off-hook offhook
>>script callback callback
>>modem InOut
>>modem autoconfigure type mica
>>transport preferred none
>>transport input all
>>autoselect during-login
>>autoselect ppp
>>line aux 0
>>no exec
>>line vty 0 4
>>session-timeout 60 output
>>exec-timeout 60 0
>>history size 100
>>transport preferred none
>>escape-character 3
>>!
>>
>>################################################################
>>following DEBUG:
>>
>>General OS:
>>AAA Authentication debugging is on
>>AAA Authorization debugging is on
>>Generic IP:
>>IP peer address activity debugging is on
>>PPP:
>>PPP authentication debugging is on
>>PPP protocol errors debugging is on
>>PPP protocol negotiation debugging is on
>>
>>Radius protocol debugging is on
>>Radius packet protocol debugging is on
>>
>>###############################################################
>>following DEBUG-OUTPUT:
>>Feb 2 07:36:03.478: AAA/BIND(00000162): Bind i/f Serial1/0:0
>>Feb 2 07:36:03.478: AAA/ACCT/DS0: channel=0, ds1=0, t3=0, slot=1,
>>ds0=16777216
>>Feb 2 08:36:03.490 MET: %LINK-3-UPDOWN: Interface Serial1/0:0, changed
>>state to up
>>Feb 2 07:36:03.490: Se1/0:0 PPP: Using dialer call direction
>>Feb 2 07:36:03.490: Se1/0:0 PPP: Treating connection as a callin
>>Feb 2 07:36:03.490: Se1/0:0 PPP: Phase is ESTABLISHING, Passive Open
>>Feb 2 07:36:03.490: Se1/0:0 LCP: State is Listen
>>Feb 2 07:36:05.482: Se1/0:0 LCP: TIMEout: State Listen
>>Feb 2 07:36:05.482: Se1/0:0 PPP: Authorization required
>>Feb 2 07:36:05.482: Se1/0:0 AAA/AUTHOR/LCP: Authorization succeeds
>>trivially Feb 2 07:36:05.482: Se1/0:0 LCP: O CONFREQ [Listen] id 7
>>len 29 
>>Feb 2 07:36:05.482: Se1/0:0 LCP: AuthProto PAP (0x0304C023)
>>Feb 2 07:36:05.482: Se1/0:0 LCP: MagicNumber 0x14AD3E2C
>>(0x050614AD3E2C) Feb 2 07:36:05.482: Se1/0:0 LCP: MRRU 1524
>>(0x110405F4) 
>>Feb 2 07:36:05.482: Se1/0:0 LCP: EndpointDisc 1 modem-i1
>>(0x130B016D6F64656D2D6931)
>>Feb 2 07:36:05.498: Se1/0:0 LCP: I CONFREQ [REQsent] id 1 len 14
>>Feb 2 07:36:05.498: Se1/0:0 LCP: MRU 1500 (0x010405DC)
>>Feb 2 07:36:05.498: Se1/0:0 LCP: MagicNumber 0x5E52C3ED
>>(0x05065E52C3ED) Feb 2 07:36:05.498: Se1/0:0 LCP: O CONFACK [REQsent]
>>id 1 len 14 
>>Feb 2 07:36:05.498: Se1/0:0 LCP: MRU 1500 (0x010405DC)
>>Feb 2 07:36:05.498: Se1/0:0 LCP: MagicNumber 0x5E52C3ED
>>(0x05065E52C3ED) Feb 2 07:36:05.502: Se1/0:0 LCP: I CONFREJ [ACKsent]
>>id 7 len 8 
>>Feb 2 07:36:05.502: Se1/0:0 LCP: MRRU 1524 (0x110405F4)
>>Feb 2 07:36:05.502: Se1/0:0 LCP: O CONFREQ [ACKsent] id 8 len 25
>>Feb 2 07:36:05.502: Se1/0:0 LCP: AuthProto PAP (0x0304C023)
>>Feb 2 07:36:05.502: Se1/0:0 LCP: MagicNumber 0x14AD3E2C
>>(0x050614AD3E2C) Feb 2 07:36:05.502: Se1/0:0 LCP: EndpointDisc 1
>>modem-i1 (0x130B016D6F64656D2D6931)
>>Feb 2 07:36:05.522: Se1/0:0 LCP: I CONFACK [ACKsent] id 8 len 25
>>Feb 2 07:36:05.522: Se1/0:0 LCP: AuthProto PAP (0x0304C023)
>>Feb 2 07:36:05.522: Se1/0:0 LCP: MagicNumber 0x14AD3E2C
>>(0x050614AD3E2C) Feb 2 07:36:05.522: Se1/0:0 LCP: EndpointDisc 1
>>modem-i1 (0x130B016D6F64656D2D6931)
>>Feb 2 07:36:05.522: Se1/0:0 LCP: State is Open
>>Feb 2 07:36:05.522: Se1/0:0 PPP: Phase is AUTHENTICATING, by this end
>>Feb 2 07:36:05.526: Se1/0:0 PAP: I AUTH-REQ id 1 len 20 from "goofy"
>>Feb 2 07:36:05.526: Se1/0:0 PAP: Authenticating peer goofy
>>Feb 2 07:36:05.526: Se1/0:0 PPP: Phase is FORWARDING, Attempting
>>Forward Feb 2 07:36:05.526: Se1/0:0 PPP: Phase is AUTHENTICATING,
>>Unauthenticated User
>>Feb 2 07:36:05.526: AAA/AUTHEN/PPP (00000162): Pick method list
>>'default' Feb 2 07:36:05.526: Se1/0:0 PPP: Sent PAP LOGIN Request
>>Feb 2 07:36:05.526: RADIUS/ENCODE(00000162):Orig. component type =
>>ISDN 
>>Feb 2 07:36:05.526: RADIUS: AAA Unsupported Attr: interface [153] 11
>>Feb 2 07:36:05.526: RADIUS: 53 65 72 69 61 6C 31 2F 30 [Serial1/0]
>>Feb 2 07:36:05.526: RADIUS(00000162): Storing nasport 20000 in rad_db
>>Feb 2 07:36:05.526: RADIUS(00000162): Config NAS IP: 0.0.0.0
>>Feb 2 07:36:05.526: RADIUS/ENCODE(00000162): acct_session_id: 355
>>Feb 2 07:36:05.526: RADIUS(00000162): sending
>>Feb 2 07:36:05.526: RADIUS/ENCODE: Best Local IP-Address NAS-IP for
>>Radius-Server RADIUS
>>Feb 2 07:36:05.526: RADIUS(00000162): Send Access-Request to
>>RADIUS:1812 
>>id 1645/69, len 107
>>Feb 2 07:36:05.526: RADIUS: authenticator 23 E7 EC F2 1C 4C 00 AD - 73
>>E7 20 AE 33 43 31 CA
>>Feb 2 07:36:05.526: RADIUS: Framed-Protocol [7] 6 PPP [1]
>>Feb 2 07:36:05.526: RADIUS: User-Name [1] 8 "goofy"
>>Feb 2 07:36:05.526: RADIUS: User-Password [2] 18 *
>>Feb 2 07:36:05.526: RADIUS: NAS-Port [5] 6 20000
>>Feb 2 07:36:05.526: RADIUS: NAS-Port-Type [61] 6 ISDN [2]
>>Feb 2 07:36:05.526: RADIUS: Calling-Station-Id [31] 12 "phone-nr"
>>Feb 2 07:36:05.526: RADIUS: Called-Station-Id [30] 7 "71840"
>>Feb 2 07:36:05.526: RADIUS: Connect-Info [77] 12 "64000 HDLC"
>>Feb 2 07:36:05.526: RADIUS: Service-Type [6] 6 Framed [2]
>>Feb 2 07:36:05.526: RADIUS: NAS-IP-Address [4] 6 NAS-IP
>>Feb 2 07:36:05.534: RADIUS: Received from id 1645/69 RADIUS:1812,
>>Access-Accept, len 44
>>Feb 2 07:36:05.534: RADIUS: authenticator 2D 7A 6E CD C0 80 0A 58 - 8C
>>D7 35 13 02 6A D8 D9
>>Feb 2 07:36:05.534: RADIUS: Service-Type [6] 6 Framed [2]
>>Feb 2 07:36:05.534: RADIUS: Framed-Protocol [7] 6 PPP [1]
>>Feb 2 07:36:05.534: RADIUS: Framed-IP-Netmask [9] 6 255.255.255.0
>>Feb 2 07:36:05.534: RADIUS: Framed-IP-Address [8] 6 10.10.47.167
>>Feb 2 07:36:05.534: RADIUS(00000162): Received from id 1645/69
>>Feb 2 07:36:05.534: Se1/0:0 PPP: Received LOGIN Response PASS
>>Feb 2 07:36:05.534: Se1/0:0 PPP/AAA: Check Attr: service-type
>>Feb 2 07:36:05.534: Se1/0:0 PPP/AAA: Check Attr: Framed-Protocol
>>Feb 2 07:36:05.534: Se1/0:0 PPP/AAA: Check Attr: netmask
>>Feb 2 07:36:05.534: Se1/0:0 PPP/AAA: Check Attr: route: Peruser
>>Feb 2 07:36:05.534: Se1/0:0 PPP/AAA: Check Attr: addr
>>Feb 2 07:36:05.534: Se1/0:0 PPP: Phase is FORWARDING, Attempting
>>Forward Feb 2 07:36:05.534: Se1/0:0 PPP: Phase is AUTHENTICATING,
>>Authenticated User Feb 2 07:36:05.534: Se1/0:0 AAA/AUTHOR/LCP:
>>Process Author 
>>Feb 2 07:36:05.534: Se1/0:0 AAA/AUTHOR/LCP: Process Attr: service-type
>>Feb 2 07:36:05.534: Se1/0:0 PAP: O AUTH-ACK id 1 len 5
>>Feb 2 07:36:05.534: Se1/0:0 PPP: Phase is FORWARDING
>>Feb 2 07:36:05.534: Vi1 PPP: Phase is DOWN, Setup
>>Feb 2 07:36:05.534: AAA/BIND(00000162): Bind i/f Virtual-Access1
>>Feb 2 07:36:05.534: Vi1 PPP: Authorization required
>>Feb 2 07:36:05.534: Vi1 PPP: No remote authentication for call-in
>>Feb 2 07:36:05.534: Vi1 PPP: Phase is ESTABLISHING
>>Feb 2 07:36:05.534: Se1/0:0 PPP: Phase is FORWARDED
>>Feb 2 07:36:05.534: Vi1 LCP: I FORCED rcvd CONFACK len 21
>>Feb 2 07:36:05.534: Vi1 LCP: AuthProto PAP (0x0304C023)
>>Feb 2 07:36:05.534: Vi1 LCP: MagicNumber 0x14AD3E2C (0x050614AD3E2C)
>>Feb 2 07:36:05.538: Vi1 LCP: EndpointDisc 1 modem-i1
>>(0x130B016D6F64656D2D6931)
>>Feb 2 07:36:05.538: Vi1 LCP: I FORCED sent CONFACK len 10
>>Feb 2 07:36:05.538: Vi1 LCP: MRU 1500 (0x010405DC)
>>Feb 2 07:36:05.538: Vi1 LCP: MagicNumber 0x5E52C3ED (0x05065E52C3ED)
>>Feb 2 07:36:05.538: Vi1 PPP: Phase is AUTHENTICATING, by this end
>>Feb 2 07:36:05.538: Vi1 AAA/AUTHOR/LCP: Process Author
>>Feb 2 07:36:05.538: Vi1 AAA/AUTHOR/LCP: Process Attr: service-type
>>Feb 2 07:36:05.538: Vi1 PPP: Phase is UP
>>Feb 2 07:36:05.538: Vi1 PPP: Process pending ncp packets
>>Feb 2 07:36:05.538: Se1/0:0 PPP: Process pending ncp packets
>>Feb 2 08:36:05.538 MET: %LINK-3-UPDOWN: Interface Virtual-Access1,
>>changed state to up
>>Feb 2 07:36:05.550: Vi1 CCP: I CONFREQ [Not negotiated] id 1 len 10
>>Feb 2 07:36:05.550: Vi1 CCP: Deflate 0x7800 (0x1A047800)
>>Feb 2 07:36:05.550: Vi1 CCP: Predictor1 (0x0102)
>>Feb 2 07:36:05.550: Vi1 LCP: O PROTREJ [Open] id 1 len 16 protocol CCP
>>(0x80FD0101000A1A0478000102)
>>Feb 2 07:36:05.554: Vi1 IPCP: I CONFREQ [Not negotiated] id 1 len 28
>>Feb 2 07:36:05.554: Vi1 IPCP: Address 0.0.0.0 (0x030600000000)
>>Feb 2 07:36:05.554: Vi1 IPCP: CompressType VJ 15 slots CompressSlotID
>>(0x0206002D0F01)
>>Feb 2 07:36:05.554: Vi1 IPCP: PrimaryDNS 131.188.3.73 (0x810683BC0349)
>>Feb 2 07:36:05.554: Vi1 IPCP: SecondaryDNS 255.255.255.255
>>(0x8306FFFFFFFF) Feb 2 07:36:05.554: Vi1 LCP: O PROTREJ [Open] id 2
>>len 34 protocol IPCP 
>>Feb 2 07:36:05.554: Vi1 LCP: (0x80210101001C0306000000000206002D)
>>Feb 2 07:36:05.554: Vi1 LCP: (0x0F01810683BC03498306FFFFFFFF)
>>Feb 2 07:36:05.558: Vi1 IPV6CP: I CONFREQ [Not negotiated] id 1 len 14
>>Feb 2 07:36:05.558: Vi1 IPV6CP: Interface-Id 0207:E9FF:FE5D:BB9E
>>(0x010A0207E9FFFE5DBB9E)
>>Feb 2 07:36:05.558: Vi1 LCP: O PROTREJ [Open] id 3 len 20 protocol
>>IPV6CP (0x80570101000E010A0207E9FFFE5DBB9E)
>>Feb 2 07:36:05.570: Vi1 IPCP: I TERMREQ [Not negotiated] id 1 len 4
>>Feb 2 07:36:05.570: Vi1 IPCP: Lower layer not up, discarding packet
>>Feb 2 07:36:05.574: Vi1 IPV6CP: I TERMREQ [Not negotiated] id 1 len 4
>>Feb 2 07:36:05.574: Vi1 LCP: O PROTREJ [Open] id 4 len 10 protocol
>>IPV6CP (0x805705010004)
>>Feb 2 08:36:06.534 MET: %LINEPROTO-5-UPDOWN: Line protocol on
>>Interface Serial1/0:0, changed state to up
>>Feb 2 08:36:06.538 MET: %LINEPROTO-5-UPDOWN: Line protocol on
>>Interface Virtual-Access1, changed state to up
>>Feb 2 07:36:08.674: Vi1 IPCP: I TERMREQ [Not negotiated] id 1 len 4
>>Feb 2 07:36:08.674: Vi1 IPCP: Lower layer not up, discarding packet
>>Feb 2 07:36:08.678: Vi1 IPV6CP: I TERMREQ [Not negotiated] id 1 len 4
>>Feb 2 07:36:08.678: Vi1 LCP: O PROTREJ [Open] id 5 len 10 protocol
>>IPV6CP (0x805705010004)
>>Feb 2 08:36:09.490 MET: %ISDN-6-CONNECT: Interface Serial1/0:0 is now
>>connected to phone-nr goofy
>>Feb 2 07:36:11.746: Vi1 IPCP: I TERMREQ [Not negotiated] id 1 len 4
>>Feb 2 07:36:11.746: Vi1 IPCP: Lower layer not up, discarding packet
>>Feb 2 07:36:11.746: Vi1 IPV6CP: I TERMREQ [Not negotiated] id 1 len 4
>>Feb 2 07:36:11.746: Vi1 LCP: O PROTREJ [Open] id 6 len 10 protocol
>>IPV6CP (0x805705010004)
>>Feb 2 07:36:14.814: Vi1 IPCP: I TERMREQ [Not negotiated] id 1 len 4
>>Feb 2 07:36:14.814: Vi1 IPCP: Lower layer not up, discarding packet
>>Feb 2 07:36:14.818: Vi1 IPV6CP: I TERMREQ [Not negotiated] id 1 len 4
>>Feb 2 07:36:14.818: Vi1 LCP: O PROTREJ [Open] id 7 len 10 protocol
>>IPV6CP (0x805705010004)
>>Feb 2 07:36:17.886: Vi1 IPCP: I TERMREQ [Not negotiated] id 1 len 4
>>Feb 2 07:36:17.886: Vi1 IPCP: Lower layer not up, discarding packet
>>Feb 2 07:36:17.886: Vi1 IPV6CP: I TERMREQ [Not negotiated] id 1 len 4
>>Feb 2 07:36:17.886: Vi1 LCP: O PROTREJ [Open] id 8 len 10 protocol
>>IPV6CP (0x805705010004)
>>Feb 2 07:36:20.954: Vi1 LCP: I TERMREQ [Open] id 2 len 4
>>Feb 2 07:36:20.954: Vi1 LCP: O TERMACK [Open] id 2 len 4
>>Feb 2 07:36:20.954: Vi1 PPP: Sending Acct Event[Down] id[162]
>>Feb 2 07:36:20.958: Vi1 IPCP: State is Closed
>>Feb 2 07:36:20.958: Vi1 PPP: Phase is TERMINATING
>>Feb 2 07:36:20.958: Se1/0:0 PPP: Sending Acct Event[Down] id[162]
>>Feb 2 07:36:20.958: Se1/0:0 PPP: Phase is TERMINATING
>>Feb 2 07:36:20.958: Se1/0:0 LCP: State is Closed
>>Feb 2 07:36:20.958: Se1/0:0 PPP: Phase is DOWN
>>Feb 2 08:36:20.958 MET: %ISDN-6-DISCONNECT: Interface Serial1/0:0
>>disconnected from phone-nr goofy, call lasted 17 seconds
>>Feb 2 08:36:20.962 MET: %LINK-3-UPDOWN: Interface Virtual-Access1,
>>changed state to down
>>Feb 2 07:36:20.962: Vi1 LCP: State is Closed
>>Feb 2 07:36:20.962: Vi1 PPP: Phase is DOWN
>>Feb 2 08:36:21.034 MET: %LINK-3-UPDOWN: Interface Serial1/0:0, changed
>>state to down
>>Feb 2 08:36:21.958 MET: %LINEPROTO-5-UPDOWN: Line protocol on
>>Interface Virtual-Access1, changed state to down
>>Feb 2 08:36:21.958 MET: %LINEPROTO-5-UPDOWN: Line protocol on
>>Interface Serial1/0:0, changed state to down
>>
>>    
>>
>########################################################################
>########
>  
>
>>Thanks
>>Florian
>>
>>
>>
>>Dennis Peng wrote:
>>
>>    
>>
>>>On Feb 1, 2005, at 4:59 AM, Florian Prester wrote:
>>>
>>>      
>>>
>>>>Hi,
>>>>
>>>>I am using an CISCO (IOS (tm) 3700 Software (C3725-IPBASE-M),
>>>>Version 
>>>>12.3(10), RELEASE SOFTWARE (fc3)) as a dialin router. The
>>>>modem-calls succeed, but isdn-calls fail.
>>>>        
>>>>
>>>I'm a little confused by this statement because in the debug trace
>>>you show below, you show a modem call which fails.
>>>
>>>
>>>      
>>>
>>>>First my Radius server is serving the IP-Address of the calling
>>>>client, the authentication succeed as well.
>>>>        
>>>>
>>>Is your RADIUS server assigning IP addresses for all of your users?
>>>
>>>      
>>>
>>>>But the my NAS is or is not arguing with the caller, about the IP.
>>>>        
>>>>
>>>Can you send me your full configuration and also a new set of
>>>debugs for a failing call with the following debugs turned on:
>>>
>>>debug aaa authen
>>>debug aaa author
>>>debug ppp negot
>>>debug ppp authen
>>>debug ppp error
>>>debug radius authen
>>>debug ip peer
>>>
>>>Thanks.
>>>
>>>Dennis
>>>      
>>>
>>--
>>--------------------------------------------------------------
>>Dipl. Inf. Florian Prester
>>Network Administration
>>Regionales RechenZentrum Erlangen
>>Universitaet Erlangen-Nuernberg
>>Germany
>>
>>Tel.: +499131 8527813
>>
>>_______________________________________________
>>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-nsp
>>archive at http://puck.nether.net/pipermail/cisco-nsp/
>>    
>>

-- 
--------------------------------------------------------------
Dipl. Inf. Florian Prester
Network Administration
Regionales RechenZentrum Erlangen
Universitaet Erlangen-Nuernberg
Germany

Tel.: +499131 8527813