[c-nsp] ISDN Dialin RADIUS

Wed Feb 2 03:49:20 EST 2005

> 
> Question:
> Do I have to use Virtual-profile. And what is it exactly, any
> documentation-hints?

If you apply per-user attributes, you need to use virtual-profiles for
sync/ISDN calls. Please see
http://www.cisco.com/warp/public/112/chapter16.htm for a general
overview of dial concepts and
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fdial_c/fnsprt8/dafvprof.htm for vprofile configuration..

	oli

> 
> Oliver Boehmer (oboehmer) wrote:
> 
>> Florian,
>> 
>> can you please add virtual-profile configuration and try again?
>> 
>> virtual-profile virtual-template 1
>> interface Virtual-template 1
>> ip unnumbered Loopback0
>> encapsulation ppp
>> peer default ip address pool setup_pool
>> ppp authentication pap
>> 
>> The call fails as the router tries to terminate it on a
>> virtual-access interface, but due to the missing virtual-template
>> config, the virtual-access interface has no network protocol config
>> (in particular no IP config), and all NCP attempts fail.
>> 
>> 	oli
>> 
>> P.S: This is a different debug than the one you sent originally..
>> 
>> Florian Prester <> wrote on Wednesday, February 02, 2005 9:00 AM:
>> 
>> 
>> 
>>> Hi,
>>> YES, the RADIUS is assigning IP addresses for all users.
>>> 
>>> #######################################################
>>> following-Config: 
>>> 
>>> current configuration : 8815 bytes
>>> !
>>> ! Last configuration change at 08:35:57 MET Wed Feb 2 2005 by @admin
>>> ! NVRAM config last updated at 12:15:36 MET Tue Feb 1 2005 by
>>> @admin ! version 12.3
>>> service timestamps debug datetime msec
>>> service timestamps log datetime msec localtime show-timezone
>>> service password-encryption
>>> service linenumber
>>> !
>>> hostname modem-i1
>>> !
>>> boot-start-marker
>>> boot system flash flash:c3725-ipbase-mz.123-10.bin
>>> boot-end-marker
>>> !
>>> card type e1 1
>>> logging buffered 512000 debugging
>>> !
>>> clock timezone MET 1
>>> clock summer-time MET recurring last Sun Mar 2:00 last Sun Oct 3:00
>>> modem country mica germany aaa new-model
>>> !
>>> !
>>> aaa authentication login default group radius local none
>>> aaa authentication enable default enable line none
>>> aaa authentication ppp default if-needed group radius
>>> aaa authorization exec default group radius local
>>> aaa authorization network default group radius none
>>> aaa accounting delay-start
>>> aaa accounting exec default start-stop group radius
>>> aaa accounting network default start-stop group radius
>>> aaa accounting system default start-stop group radius
>>> aaa session-id common
>>> ip subnet-zero
>>> no ip source-route
>>> ip cef
>>> isdn switch-type primary-net5
>>> isdn logging
>>> !
>>> chat-script offhook "" "ATH1" OK
>>> chat-script callback ABORT ERROR ABORT BUSY "" "ATDT\T" TIMEOUT 60
>>> "CONNECT" \C !
>>> !
>>> controller E1 1/0
>>> pri-group timeslots 1-31
>>> !
>>> !
>>> interface Loopback0
>>> ip address 192.44.86.6 255.255.255.255
>>> !
>>> interface FastEthernet0/1
>>> ip address 192.44.86.36 255.255.255.224
>>> ip access-group 101 out
>>> ip mask-reply
>>> ip directed-broadcast 3
>>> no ip proxy-arp
>>> ip pim sparse-dense-mode
>>> ip multicast ttl-threshold 16
>>> no ip route-cache cef
>>> no ip route-cache
>>> ip cgmp
>>> no ip mroute-cache
>>> ip ospf cost 1
>>> duplex auto
>>> speed auto
>>> !
>>> interface Serial1/0:15
>>> ip unnumbered Loopback0
>>> ip pim sparse-mode
>>> encapsulation ppp
>>> dialer idle-timeout 6000
>>> dialer-group 1
>>> isdn switch-type primary-net5
>>> isdn incoming-voice modem
>>> isdn skip-async-callerid-check
>>> no peer default ip address
>>> no keepalive
>>> no cdp enable
>>> ppp authentication pap
>>> ppp multilink
>>> !
>>> interface Group-Async0
>>> ip unnumbered Loopback0
>>> encapsulation ppp
>>> ip tcp header-compression
>>> dialer in-band
>>> dialer idle-timeout 6000
>>> async mode interactive
>>> peer default ip address pool setup_pool
>>> ppp authentication pap
>>> group-range 65 94
>>> !
>>> router ospf 1
>>> log-adjacency-changes
>>> redistribute connected subnets
>>> redistribute static subnets
>>> network 10.8.0.0 0.0.255.255 area 0.0.0.0
>>> network 192.44.86.32 0.0.0.31 area 0.0.0.0
>>> !
>>> ip local pool setup-pool 172.16.21.1 172.16.21.30
>>> ip default-gateway 192.44.86.34
>>> ip classless
>>> ip default-network 0.0.0.0
>>> ip route 0.0.0.0 0.0.0.0 192.44.86.35
>>> ip route 0.0.0.0 0.0.0.0 192.44.86.34 150
>>> ip route 0.0.0.0 0.0.0.0 Null0 200
>>> ip route 192.44.83.24 255.255.255.248 192.44.82.78
>>> ip route 192.44.83.40 255.255.255.248 192.44.82.140
>>> ip route 192.44.83.48 255.255.255.248 192.44.82.48
>>> ip route 192.44.83.56 255.255.255.248 192.44.82.35
>>> ip route 192.44.90.0 255.255.255.0 192.44.82.11
>>> no ip http server
>>> ip pim accept-rp auto-rp
>>> ip ospf name-lookup
>>> line con 0
>>> line 65 94
>>> script modem-off-hook offhook
>>> script callback callback
>>> modem InOut
>>> modem autoconfigure type mica
>>> transport preferred none
>>> transport input all
>>> autoselect during-login
>>> autoselect ppp
>>> line aux 0
>>> no exec
>>> line vty 0 4
>>> session-timeout 60 output
>>> exec-timeout 60 0
>>> history size 100
>>> transport preferred none
>>> escape-character 3
>>> !
>>> 
>>> ################################################################
>>> following DEBUG: 
>>> 
>>> General OS:
>>> AAA Authentication debugging is on
>>> AAA Authorization debugging is on
>>> Generic IP:
>>> IP peer address activity debugging is on
>>> PPP:
>>> PPP authentication debugging is on
>>> PPP protocol errors debugging is on
>>> PPP protocol negotiation debugging is on
>>> 
>>> Radius protocol debugging is on
>>> Radius packet protocol debugging is on
>>> 
>>> ###############################################################
>>> following DEBUG-OUTPUT: Feb 2 07:36:03.478: AAA/BIND(00000162):
>>> Bind i/f Serial1/0:0 
>>> Feb 2 07:36:03.478: AAA/ACCT/DS0: channel=0, ds1=0, t3=0, slot=1,
>>> ds0=16777216 Feb 2 08:36:03.490 MET: %LINK-3-UPDOWN: Interface
>>> Serial1/0:0, changed state to up Feb 2 07:36:03.490: Se1/0:0 PPP:
>>> Using dialer call direction 
>>> Feb 2 07:36:03.490: Se1/0:0 PPP: Treating connection as a callin
>>> Feb 2 07:36:03.490: Se1/0:0 PPP: Phase is ESTABLISHING, Passive Open
>>> Feb 2 07:36:03.490: Se1/0:0 LCP: State is Listen
>>> Feb 2 07:36:05.482: Se1/0:0 LCP: TIMEout: State Listen
>>> Feb 2 07:36:05.482: Se1/0:0 PPP: Authorization required
>>> Feb 2 07:36:05.482: Se1/0:0 AAA/AUTHOR/LCP: Authorization succeeds
>>> trivially Feb 2 07:36:05.482: Se1/0:0 LCP: O CONFREQ [Listen] id 7
>>> len 29 Feb 2 07:36:05.482: Se1/0:0 LCP: AuthProto PAP (0x0304C023)
>>> Feb 2 07:36:05.482: Se1/0:0 LCP: MagicNumber 0x14AD3E2C
>>> (0x050614AD3E2C) Feb 2 07:36:05.482: Se1/0:0 LCP: MRRU 1524
>>> (0x110405F4) Feb 2 07:36:05.482: Se1/0:0 LCP: EndpointDisc 1
>>> modem-i1 (0x130B016D6F64656D2D6931) Feb 2 07:36:05.498: Se1/0:0
>>> LCP: I CONFREQ [REQsent] id 1 len 14 
>>> Feb 2 07:36:05.498: Se1/0:0 LCP: MRU 1500 (0x010405DC)
>>> Feb 2 07:36:05.498: Se1/0:0 LCP: MagicNumber 0x5E52C3ED
>>> (0x05065E52C3ED) Feb 2 07:36:05.498: Se1/0:0 LCP: O CONFACK
>>> [REQsent] id 1 len 14 Feb 2 07:36:05.498: Se1/0:0 LCP: MRU 1500
>>> (0x010405DC) 
>>> Feb 2 07:36:05.498: Se1/0:0 LCP: MagicNumber 0x5E52C3ED
>>> (0x05065E52C3ED) Feb 2 07:36:05.502: Se1/0:0 LCP: I CONFREJ
>>> [ACKsent] id 7 len 8 Feb 2 07:36:05.502: Se1/0:0 LCP: MRRU 1524
>>> (0x110405F4) 
>>> Feb 2 07:36:05.502: Se1/0:0 LCP: O CONFREQ [ACKsent] id 8 len 25
>>> Feb 2 07:36:05.502: Se1/0:0 LCP: AuthProto PAP (0x0304C023)
>>> Feb 2 07:36:05.502: Se1/0:0 LCP: MagicNumber 0x14AD3E2C
>>> (0x050614AD3E2C) Feb 2 07:36:05.502: Se1/0:0 LCP: EndpointDisc 1
>>> modem-i1 (0x130B016D6F64656D2D6931)
>>> Feb 2 07:36:05.522: Se1/0:0 LCP: I CONFACK [ACKsent] id 8 len 25
>>> Feb 2 07:36:05.522: Se1/0:0 LCP: AuthProto PAP (0x0304C023)
>>> Feb 2 07:36:05.522: Se1/0:0 LCP: MagicNumber 0x14AD3E2C
>>> (0x050614AD3E2C) Feb 2 07:36:05.522: Se1/0:0 LCP: EndpointDisc 1
>>> modem-i1 (0x130B016D6F64656D2D6931)
>>> Feb 2 07:36:05.522: Se1/0:0 LCP: State is Open
>>> Feb 2 07:36:05.522: Se1/0:0 PPP: Phase is AUTHENTICATING, by this
>>> end Feb 2 07:36:05.526: Se1/0:0 PAP: I AUTH-REQ id 1 len 20 from
>>> "goofy" Feb 2 07:36:05.526: Se1/0:0 PAP: Authenticating peer goofy
>>> Feb 2 07:36:05.526: Se1/0:0 PPP: Phase is FORWARDING, Attempting
>>> Forward Feb 2 07:36:05.526: Se1/0:0 PPP: Phase is AUTHENTICATING,
>>> Unauthenticated User Feb 2 07:36:05.526: AAA/AUTHEN/PPP (00000162):
>>> Pick method list 'default' Feb 2 07:36:05.526: Se1/0:0 PPP: Sent
>>> PAP LOGIN Request 
>>> Feb 2 07:36:05.526: RADIUS/ENCODE(00000162):Orig. component type =
>>> ISDN Feb 2 07:36:05.526: RADIUS: AAA Unsupported Attr: interface
>>> [153] 11 Feb 2 07:36:05.526: RADIUS: 53 65 72 69 61 6C 31 2F 30
>>> [Serial1/0] Feb 2 07:36:05.526: RADIUS(00000162): Storing nasport
>>> 20000 in rad_db Feb 2 07:36:05.526: RADIUS(00000162): Config NAS
>>> IP: 0.0.0.0 
>>> Feb 2 07:36:05.526: RADIUS/ENCODE(00000162): acct_session_id: 355
>>> Feb 2 07:36:05.526: RADIUS(00000162): sending
>>> Feb 2 07:36:05.526: RADIUS/ENCODE: Best Local IP-Address NAS-IP for
>>> Radius-Server RADIUS Feb 2 07:36:05.526: RADIUS(00000162): Send
>>> Access-Request to RADIUS:1812 id 1645/69, len 107
>>> Feb 2 07:36:05.526: RADIUS: authenticator 23 E7 EC F2 1C 4C 00 AD -
>>> 73 E7 20 AE 33 43 31 CA Feb 2 07:36:05.526: RADIUS: Framed-Protocol
>>> [7] 6 PPP [1] 
>>> Feb 2 07:36:05.526: RADIUS: User-Name [1] 8 "goofy"
>>> Feb 2 07:36:05.526: RADIUS: User-Password [2] 18 *
>>> Feb 2 07:36:05.526: RADIUS: NAS-Port [5] 6 20000
>>> Feb 2 07:36:05.526: RADIUS: NAS-Port-Type [61] 6 ISDN [2]
>>> Feb 2 07:36:05.526: RADIUS: Calling-Station-Id [31] 12 "phone-nr"
>>> Feb 2 07:36:05.526: RADIUS: Called-Station-Id [30] 7 "71840"
>>> Feb 2 07:36:05.526: RADIUS: Connect-Info [77] 12 "64000 HDLC"
>>> Feb 2 07:36:05.526: RADIUS: Service-Type [6] 6 Framed [2]
>>> Feb 2 07:36:05.526: RADIUS: NAS-IP-Address [4] 6 NAS-IP
>>> Feb 2 07:36:05.534: RADIUS: Received from id 1645/69 RADIUS:1812,
>>> Access-Accept, len 44 Feb 2 07:36:05.534: RADIUS: authenticator 2D
>>> 7A 6E CD C0 80 0A 58 - 8C D7 35 13 02 6A D8 D9 Feb 2 07:36:05.534:
>>> RADIUS: Service-Type [6] 6 Framed [2] 
>>> Feb 2 07:36:05.534: RADIUS: Framed-Protocol [7] 6 PPP [1]
>>> Feb 2 07:36:05.534: RADIUS: Framed-IP-Netmask [9] 6 255.255.255.0
>>> Feb 2 07:36:05.534: RADIUS: Framed-IP-Address [8] 6 10.10.47.167
>>> Feb 2 07:36:05.534: RADIUS(00000162): Received from id 1645/69
>>> Feb 2 07:36:05.534: Se1/0:0 PPP: Received LOGIN Response PASS
>>> Feb 2 07:36:05.534: Se1/0:0 PPP/AAA: Check Attr: service-type
>>> Feb 2 07:36:05.534: Se1/0:0 PPP/AAA: Check Attr: Framed-Protocol
>>> Feb 2 07:36:05.534: Se1/0:0 PPP/AAA: Check Attr: netmask
>>> Feb 2 07:36:05.534: Se1/0:0 PPP/AAA: Check Attr: route: Peruser
>>> Feb 2 07:36:05.534: Se1/0:0 PPP/AAA: Check Attr: addr
>>> Feb 2 07:36:05.534: Se1/0:0 PPP: Phase is FORWARDING, Attempting
>>> Forward Feb 2 07:36:05.534: Se1/0:0 PPP: Phase is AUTHENTICATING,
>>> Authenticated User Feb 2 07:36:05.534: Se1/0:0 AAA/AUTHOR/LCP:
>>> Process Author Feb 2 07:36:05.534: Se1/0:0 AAA/AUTHOR/LCP: Process
>>> Attr: service-type Feb 2 07:36:05.534: Se1/0:0 PAP: O AUTH-ACK id 1
>>> len 5 
>>> Feb 2 07:36:05.534: Se1/0:0 PPP: Phase is FORWARDING
>>> Feb 2 07:36:05.534: Vi1 PPP: Phase is DOWN, Setup
>>> Feb 2 07:36:05.534: AAA/BIND(00000162): Bind i/f Virtual-Access1
>>> Feb 2 07:36:05.534: Vi1 PPP: Authorization required
>>> Feb 2 07:36:05.534: Vi1 PPP: No remote authentication for call-in
>>> Feb 2 07:36:05.534: Vi1 PPP: Phase is ESTABLISHING
>>> Feb 2 07:36:05.534: Se1/0:0 PPP: Phase is FORWARDED
>>> Feb 2 07:36:05.534: Vi1 LCP: I FORCED rcvd CONFACK len 21
>>> Feb 2 07:36:05.534: Vi1 LCP: AuthProto PAP (0x0304C023)
>>> Feb 2 07:36:05.534: Vi1 LCP: MagicNumber 0x14AD3E2C (0x050614AD3E2C)
>>> Feb 2 07:36:05.538: Vi1 LCP: EndpointDisc 1 modem-i1
>>> (0x130B016D6F64656D2D6931) Feb 2 07:36:05.538: Vi1 LCP: I FORCED
>>> sent CONFACK len 10 
>>> Feb 2 07:36:05.538: Vi1 LCP: MRU 1500 (0x010405DC)
>>> Feb 2 07:36:05.538: Vi1 LCP: MagicNumber 0x5E52C3ED (0x05065E52C3ED)
>>> Feb 2 07:36:05.538: Vi1 PPP: Phase is AUTHENTICATING, by this end
>>> Feb 2 07:36:05.538: Vi1 AAA/AUTHOR/LCP: Process Author
>>> Feb 2 07:36:05.538: Vi1 AAA/AUTHOR/LCP: Process Attr: service-type
>>> Feb 2 07:36:05.538: Vi1 PPP: Phase is UP
>>> Feb 2 07:36:05.538: Vi1 PPP: Process pending ncp packets
>>> Feb 2 07:36:05.538: Se1/0:0 PPP: Process pending ncp packets
>>> Feb 2 08:36:05.538 MET: %LINK-3-UPDOWN: Interface Virtual-Access1,
>>> changed state to up Feb 2 07:36:05.550: Vi1 CCP: I CONFREQ [Not
>>> negotiated] id 1 len 10 Feb 2 07:36:05.550: Vi1 CCP: Deflate 0x7800
>>> (0x1A047800) 
>>> Feb 2 07:36:05.550: Vi1 CCP: Predictor1 (0x0102)
>>> Feb 2 07:36:05.550: Vi1 LCP: O PROTREJ [Open] id 1 len 16 protocol
>>> CCP (0x80FD0101000A1A0478000102) Feb 2 07:36:05.554: Vi1 IPCP: I
>>> CONFREQ [Not negotiated] id 1 len 28 Feb 2 07:36:05.554: Vi1 IPCP:
>>> Address 0.0.0.0 (0x030600000000) 
>>> Feb 2 07:36:05.554: Vi1 IPCP: CompressType VJ 15 slots
>>> CompressSlotID (0x0206002D0F01) Feb 2 07:36:05.554: Vi1 IPCP:
>>> PrimaryDNS 131.188.3.73 (0x810683BC0349) Feb 2 07:36:05.554: Vi1
>>> IPCP: SecondaryDNS 255.255.255.255 (0x8306FFFFFFFF) Feb 2
>>> 07:36:05.554: Vi1 LCP: O PROTREJ [Open] id 2 len 34 protocol IPCP
>>> Feb 2 07:36:05.554: Vi1 LCP: (0x80210101001C0306000000000206002D) 
>>> Feb 2 07:36:05.554: Vi1 LCP: (0x0F01810683BC03498306FFFFFFFF)
>>> Feb 2 07:36:05.558: Vi1 IPV6CP: I CONFREQ [Not negotiated] id 1 len
>>> 14 Feb 2 07:36:05.558: Vi1 IPV6CP: Interface-Id 0207:E9FF:FE5D:BB9E
>>> (0x010A0207E9FFFE5DBB9E) Feb 2 07:36:05.558: Vi1 LCP: O PROTREJ
>>> [Open] id 3 len 20 protocol IPV6CP
>>> (0x80570101000E010A0207E9FFFE5DBB9E) 
>>> Feb 2 07:36:05.570: Vi1 IPCP: I TERMREQ [Not negotiated] id 1 len 4
>>> Feb 2 07:36:05.570: Vi1 IPCP: Lower layer not up, discarding packet
>>> Feb 2 07:36:05.574: Vi1 IPV6CP: I TERMREQ [Not negotiated] id 1 len
>>> 4 Feb 2 07:36:05.574: Vi1 LCP: O PROTREJ [Open] id 4 len 10
>>> protocol IPV6CP (0x805705010004) Feb 2 08:36:06.534 MET:
>>> %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:0,
>>> changed state to up 
>>> Feb 2 08:36:06.538 MET: %LINEPROTO-5-UPDOWN: Line protocol on
>>> Interface Virtual-Access1, changed state to up
>>> Feb 2 07:36:08.674: Vi1 IPCP: I TERMREQ [Not negotiated] id 1 len 4
>>> Feb 2 07:36:08.674: Vi1 IPCP: Lower layer not up, discarding packet
>>> Feb 2 07:36:08.678: Vi1 IPV6CP: I TERMREQ [Not negotiated] id 1 len
>>> 4 Feb 2 07:36:08.678: Vi1 LCP: O PROTREJ [Open] id 5 len 10
>>> protocol IPV6CP (0x805705010004) Feb 2 08:36:09.490 MET:
>>> %ISDN-6-CONNECT: Interface Serial1/0:0 is now connected to phone-nr
>>> goofy Feb 2 07:36:11.746: Vi1 IPCP: I TERMREQ [Not negotiated] id 1
>>> len 4 Feb 2 07:36:11.746: Vi1 IPCP: Lower layer not up, discarding
>>> packet Feb 2 07:36:11.746: Vi1 IPV6CP: I TERMREQ [Not negotiated]
>>> id 1 len 4 Feb 2 07:36:11.746: Vi1 LCP: O PROTREJ [Open] id 6 len
>>> 10 protocol IPV6CP (0x805705010004) Feb 2 07:36:14.814: Vi1 IPCP: I
>>> TERMREQ [Not negotiated] id 1 len 4 Feb 2 07:36:14.814: Vi1 IPCP:
>>> Lower layer not up, discarding packet Feb 2 07:36:14.818: Vi1
>>> IPV6CP: I TERMREQ [Not negotiated] id 1 len 4 Feb 2 07:36:14.818:
>>> Vi1 LCP: O PROTREJ [Open] id 7 len 10 protocol IPV6CP
>>> (0x805705010004) Feb 2 07:36:17.886: Vi1 IPCP: I TERMREQ [Not
>>> negotiated] id 1 len 4 Feb 2 07:36:17.886: Vi1 IPCP: Lower layer
>>> not up, discarding packet Feb 2 07:36:17.886: Vi1 IPV6CP: I TERMREQ
>>> [Not negotiated] id 1 len 4 Feb 2 07:36:17.886: Vi1 LCP: O PROTREJ
>>> [Open] id 8 len 10 protocol IPV6CP (0x805705010004) Feb 2
>>> 07:36:20.954: Vi1 LCP: I TERMREQ [Open] id 2 len 4   
>>> Feb 2 07:36:20.954: Vi1 LCP: O TERMACK [Open] id 2 len 4
>>> Feb 2 07:36:20.954: Vi1 PPP: Sending Acct Event[Down] id[162]
>>> Feb 2 07:36:20.958: Vi1 IPCP: State is Closed
>>> Feb 2 07:36:20.958: Vi1 PPP: Phase is TERMINATING
>>> Feb 2 07:36:20.958: Se1/0:0 PPP: Sending Acct Event[Down] id[162]
>>> Feb 2 07:36:20.958: Se1/0:0 PPP: Phase is TERMINATING
>>> Feb 2 07:36:20.958: Se1/0:0 LCP: State is Closed
>>> Feb 2 07:36:20.958: Se1/0:0 PPP: Phase is DOWN
>>> Feb 2 08:36:20.958 MET: %ISDN-6-DISCONNECT: Interface Serial1/0:0
>>> disconnected from phone-nr goofy, call lasted 17 seconds
>>> Feb 2 08:36:20.962 MET: %LINK-3-UPDOWN: Interface Virtual-Access1,
>>> changed state to down Feb 2 07:36:20.962: Vi1 LCP: State is Closed
>>> Feb 2 07:36:20.962: Vi1 PPP: Phase is DOWN
>>> Feb 2 08:36:21.034 MET: %LINK-3-UPDOWN: Interface Serial1/0:0,
>>> changed state to down Feb 2 08:36:21.958 MET: %LINEPROTO-5-UPDOWN:
>>> Line protocol on Interface Virtual-Access1, changed state to down
>>> Feb 2 08:36:21.958 MET: %LINEPROTO-5-UPDOWN: Line protocol on
>>> Interface Serial1/0:0, changed state to down
>>> 
>>> 
>>> 
>>
########################################################################
>> ######## 
>> 
>> 
>>> Thanks
>>> Florian
>>> 
>>> 
>>> 
>>> Dennis Peng wrote:
>>> 
>>> 
>>> 
>>>> On Feb 1, 2005, at 4:59 AM, Florian Prester wrote:
>>>> 
>>>> 
>>>> 
>>>>> Hi,
>>>>> 
>>>>> I am using an CISCO (IOS (tm) 3700 Software (C3725-IPBASE-M),
>>>>> Version 
>>>>> 12.3(10), RELEASE SOFTWARE (fc3)) as a dialin router. The
>>>>> modem-calls succeed, but isdn-calls fail.
>>>>> 
>>>>> 
>>>> I'm a little confused by this statement because in the debug trace
>>>> you show below, you show a modem call which fails.
>>>> 
>>>> 
>>>> 
>>>> 
>>>>> First my Radius server is serving the IP-Address of the calling
>>>>> client, the authentication succeed as well.
>>>>> 
>>>>> 
>>>> Is your RADIUS server assigning IP addresses for all of your users?
>>>> 
>>>> 
>>>> 
>>>>> But the my NAS is or is not arguing with the caller, about the IP.
>>>>> 
>>>>> 
>>>> Can you send me your full configuration and also a new set of
>>>> debugs for a failing call with the following debugs turned on:
>>>> 
>>>> debug aaa authen
>>>> debug aaa author
>>>> debug ppp negot
>>>> debug ppp authen
>>>> debug ppp error
>>>> debug radius authen
>>>> debug ip peer
>>>> 
>>>> Thanks.
>>>> 
>>>> Dennis
>>>> 
>>>> 
>>> --
>>> --------------------------------------------------------------
>>> Dipl. Inf. Florian Prester
>>> Network Administration
>>> Regionales RechenZentrum Erlangen
>>> Universitaet Erlangen-Nuernberg
>>> Germany
>>> 
>>> Tel.: +499131 8527813
>>> 
>>> _______________________________________________
>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>> 
>>> 
> 
> 
> --
> --------------------------------------------------------------
> Dipl. Inf. Florian Prester
> Network Administration
> Regionales RechenZentrum Erlangen
> Universitaet Erlangen-Nuernberg
> Germany
> 
> Tel.: +499131 8527813