[c-nsp] Cisco 2621 & Fast Ethernet Network Modules

[Sorin CONSTANTINESCU]

sorry. replace 2fe-2ce1b with 2fe2w :)


On Wed, 2 Feb 2005 16:48:48 +0200, Sorin CONSTANTINESCU
<consta at gmail.com> wrote:
> Only NMs with FastEthernet or Ethernet (not combo, as in 1fe-2ce1b,
> 2fe-2ce1b) are supported.
> 
> 
> On Wed, 2 Feb 2005 08:27:29 -0600, Claydon, Tom
> <Tom.Claydon at dobsontelco.net> wrote:
> > Hello,
> >
> > We have a customer with one 2610 and one 2621, and both routers need
> > additional 10/100 Fast Ethernet interfaces. We had thought about adding
> > either a NM-1E or NM-4E module, but my understanding is that these
> > modules are 10BaseT only.
> >
> > Will a NM-2FE2W module work in either one of these routers?
> >
> > Thanks,
> >
> > = TC
> >
> > --
> > Tom Claydon, IT/ATM Network Engineer
> > Dobson Telephone Company
> > phone: (405) 391-8201  cell: (405) 834-0341
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> 
> --
> Sorin CONSTANTINESCU
> consta at gmail.com
> Linux Registered User #222086
> 


-- 
Sorin CONSTANTINESCU
consta at gmail.com
Linux Registered User #222086