[c-nsp] Cisco 2621 & Fast Ethernet Network Modules

[Rey Martin]

which NM did you refer to?

I always had impression that I could not add extra FE to 261x/2x. only 
E(10baseT)



----- Original Message ----- 
From: "Sorin CONSTANTINESCU" <consta at gmail.com>
To: "Claydon, Tom" <Tom.Claydon at dobsontelco.net>
Cc: <cisco-nsp at puck.nether.net>
Sent: Wednesday, February 02, 2005 10:49 PM
Subject: Re: [c-nsp] Cisco 2621 & Fast Ethernet Network Modules


> sorry. replace 2fe-2ce1b with 2fe2w :)
>
>
> On Wed, 2 Feb 2005 16:48:48 +0200, Sorin CONSTANTINESCU
> <consta at gmail.com> wrote:
>> Only NMs with FastEthernet or Ethernet (not combo, as in 1fe-2ce1b,
>> 2fe-2ce1b) are supported.
>>
>>
>> On Wed, 2 Feb 2005 08:27:29 -0600, Claydon, Tom
>> <Tom.Claydon at dobsontelco.net> wrote:
>> > Hello,
>> >
>> > We have a customer with one 2610 and one 2621, and both routers need
>> > additional 10/100 Fast Ethernet interfaces. We had thought about adding
>> > either a NM-1E or NM-4E module, but my understanding is that these
>> > modules are 10BaseT only.
>> >
>> > Will a NM-2FE2W module work in either one of these routers?
>> >
>> > Thanks,
>> >
>> > = TC
>> >
>> > --
>> > Tom Claydon, IT/ATM Network Engineer
>> > Dobson Telephone Company
>> > phone: (405) 391-8201  cell: (405) 834-0341
>> >
>> > _______________________________________________
>> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/cisco-nsp
>> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>> >
>>
>> --
>> Sorin CONSTANTINESCU
>> consta at gmail.com
>> Linux Registered User #222086
>>
>
>
> -- 
> Sorin CONSTANTINESCU
> consta at gmail.com
> Linux Registered User #222086
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/