[c-nsp] Export from VRF into global route table

[McCallum, Robert]

nope - you can put a global route into a vrf but not the other way about.

Robert McCallum 
CCIE #8757 R&S
01415663448
07818002241 

> -----Original Message-----
> From: Pete Kruckenberg [mailto:pete at kruckenberg.com] 
> Sent: 03 February 2005 15:06
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Export from VRF into global route table
> 
> 
> I hope this is a stupid question, because I'd sooner find out 
> that I'm 
> missing something, than find out that I can't do this.
> 
> Is there a way to export routes from a VRF into the global table (GSR 
> 12404/PRP2 running 12.0.30S)?
> 
> In my searching, I found a JunOS VRF command "global export
> man <map>" that looks similar to what I'm trying to do on
> IOS.  Is there an equivalent command on IOS?
> 
> Thanks.
> Pete.
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>