[c-nsp] Catalyst 4506 won't boot!?

[Xavier]

Seems that the supervisor is faulty! :(

Port Traffic: L3 Asic Loopback ...
 0: F  1: F  2: F  3: F  4: F  5: F  6: F  7: F  8: F  9: F 10: F 11: F
 12: F 13: F 14: F 15: F 16: F 17: F 18: F 19: F 20: F 21: F 22: F 23: F
 24: F 25: F 26: F 27: F 28: F 29: F 30: F 31: F assyFail
  0 (00000000)
  cimPktBufPar                     0 (00000000)
  dhmPar                           0 (00000000)
  dtdPar                           0 (00000000)
  ffeFifo0Ovfl                     0 (00000000)
  ffeFifo1Ovfl                     0 (00000000)
  fwdCamTimeout                    0 (00000000)
  fwdMemPar                        0 (00000000)
  inCamMiss                        0 (00000000)
  inCamTimeout                     0 (00000000)
  metPar                           0 (00000000)
  n2fPar                           0 (00000000)
  nflTimeout                       0 (00000000)
  outCamMiss                       0 (00000000)
  outCamTimeout                    0 (00000000)
  p2fPar                           1 (00000001)
  pktToCpu                         0 (00000000)
  pldOvrflo                        0 (00000000)
  ppeFifo0Ovfl                     0 (00000000)
  ppeFifo1Ovfl                     0 (00000000)
  rdTimeOut                        1 (00000001)
  rep                              56 (00000038)
  reserved dump_hal() can not extract
  stmPar                           0 (00000000)
  wrTimeOut                        1 (00000001)
  au: F


  Switch Subsystem Memory ...
 
 [bla bla bla]

Error: addr 817a0080
exp:000000aaaaaaaaaaaaaaaaaa
000000aaaaaaaaaaaaaaaaaa
obs:000000000000000000000000
000000000000080000000000
52: F 53: . 54: . Error: addr 0x81400000 exp 0x0000aaaa obs 0x0000aaab
Error: addr 0x81400008 exp 0x0000aaaa obs 0x0000aaab
Error: addr 0x81400010 exp 0x0000aaaa obs 0x0000aaab
Error: addr 0x81400018 exp 0x0000aaaa obs 0x0000aaab
Error: addr 0x81400020 exp 0x0000aaaa obs 0x0000aaab
55: F


Module 1 Failed


Exiting to ios...


Xavier
--
Hint: A reload a day, keeps the TAC away .....

On Tue, 8 Feb 2005, MADMAN wrote:

> 
>   First thing I would try is pull all card minus the sup and see if it comes
> up.  If it does add one at a time.
> 
>   Dave
> 
> Xavier Mertens wrote:
> 
> > After a looooong time, I got:
> > 
> >  0: F  1: F  2: F  3: F  4: F  5: F  6: F  7: F  8: F  9: F 10: F 11: F
> >  12: F 13: F 14: F 15: F 16: F 17: F 18: F 19: F 20: F 21: F 22: F 23: F
> >  24: F 25: F 26: F 27: F 28: F 29: F 30: F 31: F
> > 
> > Port Traffic: L2 Asic Loopback ...
> > 
> > Xavier
> > --
> > The best things in life are free, but the expensive ones are still worth a
> > look.
> > 
> > On Tue, 8 Feb 2005, Xavier wrote:
> > 
> > 
> > > Hi,
> > > 
> > > I just mounted a brand new Catalyst 4506 with the following modules:
> > > 
> > > Slot1: ws-x4013+=
> > > Slot2: ws-x4448-gb-rj45=
> > > Slot3: ws-x4306-gb=
> > > Slot4: ws-x4306-gb=
> > > 
> > > Here are the messages on console:
> > > 
> > > **********************************************************
> > > *                                                        *
> > > * Welcome to Rom Monitor for WS-X4013+ System.           *
> > > * Copyright (c) 1999-2003 by Cisco Systems, Inc.         *
> > > * All rights reserved.                                   *
> > > *                                                        *
> > > **********************************************************
> > > 
> > > Rom Monitor Program Version 12.1(20r)EW1
> > > Supervisor: WS-X4013+  Chassis: WS-C4506
> > > Hardware Revisions - Board: 5.4 CPLD: 3 Dagobah: 90
> > > 
> > > 
> > > MAC Address  : 00-0e-83-5a-95-29
> > > Ip Address   : Not set.
> > > Netmask      : Not set.
> > > Gateway      : Not set.
> > > TftpServer   : Not set.
> > > Main Memory  : 256 MBytes
> > > 
> > > 
> > > 
> > > ***** The system will autoboot in 5 seconds *****
> > > 
> > > 
> > > Type control-C to prevent autobooting.
> > > . . . . .
> > > 
> > > ******** The system will autoboot now ********
> > > 
> > > 
> > > config-register = 0x2101
> > > 
> > > Autobooting using the first file from bootflash.....
> > > 
> > > 
> > > Rommon reg: 0x5A004180
> > > 
> > > Running diags...
> > > 
> > > Decompressing the image
> > > ########################## [OK]
> > > 
> > > k2diags version 2.4.2
> > > 
> > > prod: WS-X4013+  part: 73-9447-02  serial: JAE0840XJPY
> > > 
> > > 
> > > Power-on-self-test for Module 1:  WS-X4013+
> > > Port/Test Status: (. = Pass, F = Fail)
> > > Reset Reason: PowerUp
> > > 
> > > 
> > > Port Traffic: L2 Serdes Loopback ...
> > > 
> > > And nothing more! Status LEDs are red on all modules!
> > > Any suggestion?
> > > 
> > > Xavier
> > > --
> > > "Research is what I'm doing when I don't know what I'm doing."
> > > - Wernher Von Braun (1912-1977)
> > > _______________________________________________
> > > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > > 
> > 
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > 
> 
>