[c-nsp] PCMCIA flash help

Rey Martin rey.martin at qalacom.com
Wed Feb 9 09:32:33 EST 2005


you can refer to this:

http://www.cisco.com/warp/public/63/pcmciamatrix.html



rey
----- Original Message ----- 
From: "Burton Windle" <bwindle at fint.org>
To: <cisco-nsp at puck.nether.net>
Sent: Wednesday, February 09, 2005 10:27 PM
Subject: [c-nsp] PCMCIA flash help


> Is there some trick to getting a PCMCIA flash card working in IOS? I have
> an older 16mb Viking flash card that isn't playing nice. When I insert it
> into a 3600, I get this on my console:
>
> Flash card inserted. Reading filesystem...
> %Error: PCMCIA Slot0 flash bank 0 chip 0 unknown, chip id 0x0    (reversed 
> = 0x0   )
> %Error: PCMCIA Slot0 flash initialization failed
>
>
> The card appears somewhat readable, as IOS can tell how big it is:
>
> PCMCIA Slot0 flash directory:
> No files in PCMCIA Slot0 flash
> [0 bytes used, 16777212 available, 16777212 total]
> 16384K bytes of processor board PCMCIA Slot0 flash (Device not 
> programmable)
>
> I've tried with both 12.2(24) and 12.2(27) with no luck. Is the card
> likely bad, or I am missing something?
>
> -- 
> Burton Windle                           bwindle at fint.org
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/ 



More information about the cisco-nsp mailing list