[c-nsp] Configuring Ethernet Channel on a Cisco 7513

[Jack Parks]

I would highly recommend explicitly configuring EtherChannel in your
3550.  The 3550 might be able to "auto-detect" the configuration from
the 7513, but next reboot/brownout/IOS ver. you might run into some
problems.

Search for "etherchannel 3550" on CCO or 

http://www.cisco.com/en/US/partner/tech/tk389/tk213/technologies_configuration_example09186a0080094647.shtml



> But, I want to know if is necessary to apply Ethernet channel config in the
> switch where the router is connected?, and if is necessary how to configure
> it?.  The switch is a catalyst 3550.
> 
> Thanks
> 
> Alexandra Alvarado
>