[c-nsp] distribute-list prefix support in address-mode ipv4 vrf RED

[Joe Maimon]

Anyone else think this would be a good idea?

Does it exist in any train? How about other routing protocols?

rt14#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
rt14(config)#router rip
rt14(config-router)#add
rt14(config-router)#address-family ip
rt14(config-router)#address-family ipv4 vr
rt14(config-router)#address-family ipv4 vrf PRIVATE
rt14(config-router-af)#de
rt14(config-router-af)#di
rt14(config-router-af)#distr
rt14(config-router-af)#distribute-list ?
  <1-199>      IP access list number
  <1300-2699>  IP expanded access list number
  WORD         Access-list name

rt14(config-router-af)#distribute-list prefix ?
  in   Filter incoming routing updates
  out  Filter outgoing routing updates

rt14(config-router-af)#exit
rt14(config-router)#dis
rt14(config-router)#distr
rt14(config-router)#distribute-list ?
  <1-199>      IP access list number
  <1300-2699>  IP expanded access list number
  WORD         Access-list name
  gateway      Filtering incoming updates based on gateway
  prefix       Filter prefixes in routing updates

rt14(config-router)#end
rt14#sh ver
Cisco IOS Software, 7200 Software (C7200-JK9O3S-M), Version 12.3(11)T3, 
RELEASE SOFTWARE (fc4)