[c-nsp] What are people using to monitor QoS??

[Brian Feeny]

Doing like "show policy-map interface X/X" will show you that your  
traffic is being marked and queued properly,
and show you when its kicked in, etc.

Using SAA/RTR stuff to monitor jitter may be a good option to look at  
"before and after" type stuff.

Brian

On Feb 23, 2005, at 9:15 AM, Tracy Smith wrote:

> Hello.  I am researching a way to monitor QoS - other than manually
> observing the interface queues or watching for congestion with mrtg.   
> We
> are in the process of rolling out an end-to-end QoS infrastructure, and
> I would like a way to monitor when QoS has kicked in and to verify that
> the "important" traffic has been tagged correctly.
>
> Does anyone have any QoS monitoring solutions?  Any feedback would
> greatly be appreciated.
>
> Thanks much.
>
> Tracy Smith
>
> Illinois Century Network
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
------------------------------------------------------------------------ 
------
Brian Feeny, CCIE #8036, CISSP    	e: signal at shreve.net
Network Engineer           			p: 318.213.4709
ShreveNet Inc.             			f: 318.221.6612