[c-nsp] Broadband termination two IP Ranges

[Raj Panchal]

Policy based routing could be helpful to you, provided the next hope is
connected one

Raj

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Alex - Xifos Ltd
Sent: Friday, February 25, 2005 4:03 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Broadband termination two IP Ranges

Hi,

 

We terminate broadband connections onto our 7206 and assign each session an
IP from our range 84.45.x.x

 

We have just been assigned another block of ips but they are 195.8.x.x and
have a different default gateway. I have added an addition 195.8.x.x ip
address to my transit router, and I can assign a client a 195.8.x.x ip
address. They can ping each other fine, but cannot get out onto the internet
because I have the following line in my config

 

Ip route 0.0.0.0 0.0.0.0  84.45.x.x

 

But I need it to route source ip 195.8.x.x via a different route. Is this
possible?

 

I hope you understand what I mean.

 

 

Thanks,

 

Alex

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/