[c-nsp] Cisco router and 3 com back to back with frame-relay

[Michael Axelrod]

I bet if you turn off  LMI, it will work.
Mike
----- Original Message ----- 
From: "Brad Bonin" <brad at cisco.com>
To: "'Rob Polland'" <rpolland at gmail.com>; <cisco-nsp at puck.nether.net>
Sent: Tuesday, January 04, 2005 6:43 AM
Subject: RE: [c-nsp] Cisco router and 3 com back to back with frame-relay


> Try this link..
>
>
http://www.cisco.com/en/US/customer/tech/tk713/tk237/technologies_configuration_example09186a0080094a3b.shtml
>
> Ping me direct if needed.
>
> If it doesn't work, I blame it on 3com:-)
>
> Brad
> brad at cisco.com
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Rob Polland
> Sent: Tuesday, January 04, 2005 6:57 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Cisco router and 3 com back to back with frame-relay
>
> we have 2 routers , 1 cisco 1700 router and the other is 3 com router.
> we connected the two router back to back using v35 cables and we configure
cisco router as a dce ( layer 1), then we configure frame
> relay switching and frame realy intf-type dce , encapsulation frame relay
ietf and lmi type is ansi , but always the connection is
> up and line protocol is down, does anybody know how to configure the two
routers for a complete back to back scenario
>
> thanks in advance
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/