[c-nsp] Cisco router and 3 com back to back with frame-relay

[Brad Bonin]

Try this link..

http://www.cisco.com/en/US/customer/tech/tk713/tk237/technologies_configuration_example09186a0080094a3b.shtml

Ping me direct if needed.

If it doesn't work, I blame it on 3com:-)

Brad
brad at cisco.com 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Rob Polland
Sent: Tuesday, January 04, 2005 6:57 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Cisco router and 3 com back to back with frame-relay

we have 2 routers , 1 cisco 1700 router and the other is 3 com router.
we connected the two router back to back using v35 cables and we configure cisco router as a dce ( layer 1), then we configure frame
relay switching and frame realy intf-type dce , encapsulation frame relay ietf and lmi type is ansi , but always the connection is
up and line protocol is down, does anybody know how to configure the two routers for a complete back to back scenario

thanks in advance
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/