[c-nsp] 7600 does not boot 12.2

[Konstantin Barinov]

It is 26M file here...


br
--
Konstantin Barinov
INFONET AS, Tallinn, Estonia



Monday, January 17, 2005, 4:13:29 PM, you wrote:



M>    The only tftp application that I found that works is 3Coms for these
M> 40+ Meg files.

M>    Dave

M> Jon Lewis wrote:
>> On Mon, 17 Jan 2005, Konstantin Barinov wrote:
>> 
>> 
>>>Hi again 7600/6500 gurus,
>>>
>>>
>>>7603 does not want to boot 12.2, but 12.1 loads and works fine.
>>>
>>>config is:
>>>
>>>boot system flash disk0:c6k222-ps-mz.122-18.SXD3.bin
>>>boot system flash sup-bootflash:c6sup22-ps-mz.121-26.E.bin
>> 
>> 
>> Those 122-18.SXD images are HUGE.  Did you follow the docs and use
>> something other than tftp to xfer it to the router?  Are you sure you have
>> the full image on the router and not a corrupt/truncated one?
>> 
>> cisco warns that many tftp implementations cannot xfer >32mb files
>> properly...and when I tried tftping a 38mb image to a 6509, it
>> failed/truncated the image.  I had to use FTP instead of TFTP.
>> 
>> ----------------------------------------------------------------------
>>  Jon Lewis                   |  I route
>>  Senior Network Engineer     |  therefore you are
>>  Atlantic Net                |
>> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>