[c-nsp] 7600 does not boot 12.2

[Konstantin Barinov]

Hi,


Image is not so big, it is lan only.

#dir disk0:
Directory of disk0:/

    1  -rw-       14008  Jan 16 2005 09:39:50 +02:00  ok.cfg
    2  -rw-    26460700  Jan 16 2005 01:39:08 +02:00  c6k222-ps-mz.122-18.SXD3.bin


According to Cisco site, the file size is correct.

Any other ideas?

    


br
--
Konstantin Barinov
INFONET AS, Tallinn, Estonia

Monday, January 17, 2005, 3:30:12 AM, you wrote:

JL> On Mon, 17 Jan 2005, Konstantin Barinov wrote:

>>
>> Hi again 7600/6500 gurus,
>>
>>
>> 7603 does not want to boot 12.2, but 12.1 loads and works fine.
>>
>> config is:
>>
>> boot system flash disk0:c6k222-ps-mz.122-18.SXD3.bin
>> boot system flash sup-bootflash:c6sup22-ps-mz.121-26.E.bin

JL> Those 122-18.SXD images are HUGE.  Did you follow the docs and use
JL> something other than tftp to xfer it to the router?  Are you sure you have
JL> the full image on the router and not a corrupt/truncated one?

JL> cisco warns that many tftp implementations cannot xfer >32mb files
JL> properly...and when I tried tftping a 38mb image to a 6509, it
JL> failed/truncated the image.  I had to use FTP instead of TFTP.

JL> ----------------------------------------------------------------------
JL>  Jon Lewis                   |  I route
JL>  Senior Network Engineer     |  therefore you are
JL>  Atlantic Net                |
JL> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________