[c-nsp] 5509 slot0: access issues

[McLean Pickett]

Hello -

I have a 5509 with Sup III engine that is running 5.5(19) on the switch
and 12.0(27) on the RSM.

The Sup is set to boot from an image in the bootlfash and uses the
config in slot0:switch.cfg (the default).

The RSM boots from an image from slot0:

This morning I logged into the RSM and copied the config file to slot0
using the copy config slot0 command.

Now the Sup cannot read the pcmcia flash card. Dir slot0: gives me:
error = -8
Open device slot0 failed (no device)

Any ideas?

Thanks,
McLean