[c-nsp] Re: 5509 slot0: access issues

[Clinton Work]

The RSM and Supervisor use differnet flash filesystem formats. You have 
to reformat the flash card before using it in the Supervisor.

RSM: Class A filesystem
Sup III: Class C filesystem

http://www.cisco.com/en/US/partner/products/hw/routers/ps341/products_tech_note09186a00800a7515.shtml

McLean Pickett wrote:
> 
> Hello -
> 
> I have a 5509 with Sup III engine that is running 5.5(19) on the switch
> and 12.0(27) on the RSM.
> 
> The Sup is set to boot from an image in the bootlfash and uses the
> config in slot0:switch.cfg (the default).
> 
> The RSM boots from an image from slot0:
> 
> This morning I logged into the RSM and copied the config file to slot0
> using the copy config slot0 command.
> 
> Now the Sup cannot read the pcmcia flash card. Dir slot0: gives me:
> error = -8
> Open device slot0 failed (no device)
> 
> Any ideas?
> 
> Thanks,
> McLean
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/