[c-nsp] 2811 router doesn't recognize T-1 WICs?

[Jay Hennigan]

On Mon, 24 Jan 2005, Brett Frankenberger wrote:

> WIC Slot 0 only support VWICs.  Put it in slot W1, W2, or W3.

It isn't happy there either.

        WIC Slot 2:
        Unknown WAN daughter card
        Hardware revision 0.0           Board revision 70
        Serial number     0             Part number    00-0000-00
        Test history      0x0           RMA number     00-00-00
        Connector type    PCI
        EEPROM format version 0
        EEPROM contents (hex):
          0x20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
          0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Same in slot 3...

        WIC Slot 3:
        Unknown WAN daughter card
        Hardware revision 0.0           Board revision 70
        Serial number     0             Part number    00-0000-00
        Test history      0x0           RMA number     00-00-00
        Connector type    PCI
        EEPROM format version 0
        EEPROM contents (hex):
          0x20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
          0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


--
Jay Hennigan - CCIE #7880 - Network Administration - jay at west.net
WestNet:  Connecting you to the planet.  805 884-6323      WB6RDV
NetLojix Communications, Inc.  -  http://www.netlojix.com/