[c-nsp] 2811 router doesn't recognize T-1 WICs?

[Koen Peetermans]

I don't think the 2811 router has a limitation regarding WIC slots you can
use, as far as I know only the 2801 router has this limitation.

Kind regards,

Koen.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Jay Hennigan
Sent: dinsdag 25 januari 2005 5:16
To: cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] 2811 router doesn't recognize T-1 WICs?

On Tue, 25 Jan 2005, Matt Hill wrote:

> Do you need a certain IOS feature set for them?

You shouldn't.  They're the standard T-1 WIC cards with built-in CSU/DSU.
The DPRG configurator showed them as supported with base IP IOS.  I'm
running 12.3(11)T2 which is the latest.

CCO docs are somewhat sparse with regard to 28xx series router info
but no caveats I can see in the IOS release notes.  The limitation of
slot0 to VWICs only was one I must have missed, though.  Just wondering
if there's another magic command to somehow enable the WIC.

I have a TAC case open on this now, will post results.

--
Jay Hennigan - CCIE #7880 - Network Administration - jay at west.net
WestNet:  Connecting you to the planet.  805 884-6323      WB6RDV
NetLojix Communications, Inc.  -  http://www.netlojix.com/
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/