[c-nsp] Standby Sup2/MSFC2 on 7609

Ryan rlandry at tac.net
Fri Jan 28 15:48:55 EST 2005


darn...

router#remote command mod 2 remote command swi sh ver

router-sdby-sp#
Line has invalid autocommand "remote command swi sh ver"

-ryan

-----Original Message-----
From: Gert Doering [mailto:gert at greenie.muc.de] 
Sent: Friday, January 28, 2005 1:32 PM
To: Ryan
Cc: 'Anthony D Cennami'; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Standby Sup2/MSFC2 on 7609

Hi,

On Fri, Jan 28, 2005 at 01:26:04PM -0700, Ryan wrote:
> router#remote command module 2 sh ver | inc with
> router-sdby-sp#
> cisco Catalyst 6000 (R7000) processor with 112640K/18432K bytes of memory.

remote command module 2 remote command switch show ver

-> something like this, maybe?

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de



More information about the cisco-nsp mailing list