[c-nsp] Standby Sup2/MSFC2 on 7609

[Patrick Cui]

Ryan,
The answer is right below output of "show ver" on active SUP:
Router#sh ver
Cisco Internetwork Operating System Software
...<snip>

16384K bytes of Flash internal SIMM (Sector size 512K).
Standby is up
Standby has 458752K/65536K bytes of memory.              <---------HERE

Configuration register is 0x2102 





-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ryan
Sent: Friday, January 28, 2005 12:49 PM
To: 'Gert Doering'
Cc: cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] Standby Sup2/MSFC2 on 7609

darn...

router#remote command mod 2 remote command swi sh ver

router-sdby-sp#
Line has invalid autocommand "remote command swi sh ver"

-ryan

-----Original Message-----
From: Gert Doering [mailto:gert at greenie.muc.de]
Sent: Friday, January 28, 2005 1:32 PM
To: Ryan
Cc: 'Anthony D Cennami'; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Standby Sup2/MSFC2 on 7609

Hi,

On Fri, Jan 28, 2005 at 01:26:04PM -0700, Ryan wrote:
> router#remote command module 2 sh ver | inc with router-sdby-sp# cisco 
> Catalyst 6000 (R7000) processor with 112640K/18432K bytes of memory.

remote command module 2 remote command switch show ver

-> something like this, maybe?

gert
--
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/