[c-nsp] Monitoring of eigrp neighbours with snmp

Kevin Graham mahargk at gmail.com
Mon Jan 31 12:18:28 EST 2005


On Mon, 31 Jan 2005 10:07:21 -0500 (EST), Dave Temkin
<dave at ordinaryworld.com> wrote:
> Depending on IOS version (I believe this was rolled into 12.2 mainline)
> you can use "keepalive x"

Be aware of CSCeb38231 -- if you configure IPSec using tunnel
protection profiles (..and if you're not, you should -- much, much
cleaner), then you'll lose support for GRE keepalives. Besides the
case Rikard mentioned, it'd be nice to be able to monitor interface
status rather than digging through neighbor states...


More information about the cisco-nsp mailing list