[c-nsp] sup720+msfc3 - how much memory?

[Buhrmaster, Gary]

remote command switch show version

(at least in the later IOS releases.  I seem to
recall the command syntax was slightly different
in earlier releases)

Gary
 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of matthew zeier
Sent: Wednesday, July 06, 2005 3:02 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] sup720+msfc3 - how much memory?


How can I check how much memory a Sup720 and MSFC3/PFC3 have?  Box is
running IOS - 'show ver' is probably only showing memory on the
MSFC3 - what about the Sup720?

-- 
matthew zeier                        | "In mathematics you don't understand 
InteleNet Communications, Inc.       |  things.  You just get used to them." 
(949) 784-7904                       |       - John von Newmann

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/