[c-nsp] sup720+msfc3 - how much memory?

[Christopher E. Brown]

Tim Stevenson wrote:
> remote command switch show ver

Don't forget

remote command module <X> show version (where X is the standby SUP)

If you have ever had a replacement SUP com back from Cisco with a 
different amount of mem, it is going to end up as a standby somewhere in 
your network...



-- 
------------------------------------------------------------------------
Christopher E. Brown   <chris.brown at acsalaska.net>   desk (907) 550-8393
                                                      cell (907) 632-8492
IP Engineer - ACS
------------------------------------------------------------------------