[c-nsp] sup720+msfc3 - how much memory?

[Tim Stevenson]

remote command switch show ver

Tim

At 03:01 PM 7/6/2005, matthew zeier interjected:

>How can I check how much memory a Sup720 and MSFC3/PFC3 have?  Box is
>running IOS - 'show ver' is probably only showing memory on the
>MSFC3 - what about the Sup720?
>
>--
>matthew zeier                        | "In mathematics you don't understand
>InteleNet Communications, Inc.       |  things.  You just get used to them."
>(949) 784-7904                       |       - John von Newmann
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Catalyst 6500
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.