[c-nsp] AS5400 CNAM

[Kevin Warwashana]

I am currently using 5ESS.  Is there any additional configuration that needs
to be done on the 5400 to support this feature?

Thanks
Kevin

-----Original Message-----
From: Jay Hennigan [mailto:jay at west.net] 
Sent: Thursday, July 14, 2005 1:56 PM
To: Kevin Warwashana
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] AS5400 CNAM

On Thu, 14 Jul 2005, Kevin Warwashana wrote:

> Does the AS5400 support calling name delivery?  I have copied the debug
> messages below.  I am running IP Plus 12.4.1a. If not, does anyone know
when
> Cisco will support this feature?
>
> Jul 14 2005 13:37:00.066 EST: ISDN Se5/0:23 Q931: RX <- FACILITY pd = 8
> callref = 0x0003
>         Facility i = 0x91A115020101020100800D4D4943484947414E2043414C4C
> Jul 14 2005 13:37:00.066 EST: ISDN Se5/0:23 **ERROR**: Ux_BadMsg: Invalid
> Message for call state 7, call id 0x4D, call ref 0x8003, event 0x62

I know that the 5350 running 12.4(1a) supports it, would suspect that
the 5400 should as well.  What ISDN switch type?  There is an issue with
a leading non-ASCII character with the DMS if I recall correctly.  Try
setting switch type from NI-2 to DMS and see if that makes a difference.

--
Jay Hennigan - CCIE #7880 - Network Administration - jay at west.net
WestNet:  Connecting you to the planet.  805 884-6323      WB6RDV
NetLojix Communications, Inc.  -  http://www.netlojix.com/