[c-nsp] as5800 not connecting ISDN calls

[Justin Payne]

I have an as5800 that is connecting dial-up calls but i can't seem to get it 
to answer ISDN calls.  Here is my config, any ideas?

Debug Output.

> 12:28:26: Se1/0/0:9:2 PPP: Using dialer call direction
> 12:28:26: Se1/0/0:9:2 PPP: Treating connection as a callin
> 12:28:26: Se1/0/0:9:2 PPP: Session handle[2A000019] Session id[524]
> 12:28:26: Se1/0/0:9:2 PPP: Authorization required
> 12:28:26: Se1/0/0:9:2 PAP: I AUTH-REQ id 1 len 25 from "sylvanspokane"
> 12:28:26: Se1/0/0:9:2 PAP: Authenticating peer sylvanspokane
> 12:28:26: Se1/0/0:9:2 PPP: Sent PAP LOGIN Request
> 12:28:26: Se1/0/0:9:2 PPP: Received LOGIN Response PASS
> 12:28:26: Se1/0/0:9:2 DDR: Remote name for sylvanspokane
> 12:28:26: Se1/0/0:9:2 DDR: Authenticated host sylvanspokane with no 
> matching
> dialer map
> 12:28:26: Se1/0/0:9:2 PAP: O AUTH-ACK id 1 len 5
> 12:28:26: Se1/0/0:9:2 DDR: disconnecting call
>
> interface Serial1/0/0:7:23
> no ip address
> encapsulation ppp
> dialer rotary-group 0
> dialer-group 1
> isdn switch-type primary-dms100
> isdn incoming-voice modem
> no isdn outgoing display-ie
> no isdn incoming alerting add-PI
> no cdp enable
> ppp authentication pap
>
> interface Dialer0
> ip unnumbered Loopback0
> encapsulation ppp
> no ip mroute-cache
> dialer in-band
> dialer-group 1
> peer default ip address pool dynamic_1
> no fair-queue
> no cdp enable
> ppp authentication pap callin
> ppp multilink
>
> -------------------------------------------------------
Thanks,
Justin