[c-nsp] 72xx reboots with odd reason....

[David Freedman]

This is a bit weird.

Inserting an ATA flash disk into the secondary PCMCIA slot on an 7200VXR 
I/O controller, it crashes with the following "sh ver":


-----------------------------------------------------------------------------
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-K4P-M), Version 12.0(22)S5, EARLY 
DEPLOYMENT RELEASE SOF
TWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 19-Jun-03 17:25 by nmasa
Image text-base: 0x60008CC8, data-base: 0x61186000

ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105], 
DEVELOPMENT SOFTWARE
BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(21)ST4, EARLY 
DEPLOYMENT RELEASE SOFTWARE (fc1)

router uptime is 16 minutes
System returned to ROM by RPR Switchover at 15:52:30 BST Mon Jul 18 2005
System restarted at 15:53:48 BST Mon Jul 18 2005
System image file is "slot0:c7200-k4p-mz.120-22.S5.bin"

cisco 7206VXR (NPE300) processor with 229376K/65536K bytes of memory.
R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 
Cache 6 slot VXR midplane, Version 2.0

Last reset from power-on
X.25 software, Version 3.0.0.
4 FastEthernet/IEEE 802.3 interface(s)
125K bytes of non-volatile configuration memory.

8192K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
62976K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
-----------------------------------------------------------------------------



Has anybody ever heard of a 7200 crashing with an "RPR" problem?
I thought RPR was reserved for multiprocessor (i.e distributed)
devices.

I've searched for bugs relating to this but have drawn a blank.

Any ideas?

Thanks in advance.

David Freedman
Claranet UK Limited.