[c-nsp] PIX 515e VPN

[Tim Bulger]

How about:

access-list split-tunnel permit ip 10.159.1.0 255.255.255.0 any
vpngroup road split-tunnel split-tunnel 

?

-Tim

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Alvaro R
Sent: Thursday, July 21, 2005 8:16 PM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] PIX 515e VPN

I'm 6.3(3), and per your advice I added

isakmp nat-traversal 20


didn't work either :(



On 7/21/05, Jim McBurnett <jim at tgasolutions.com> wrote:
> Look up the ISAKMP nat-transparency command....
> Later,
> Jim
> 
> -----Original Message-----
> From: Alvaro R [mailto:askxfs at gmail.com]
> Sent: Thursday, July 21, 2005 5:26 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] PIX 515e VPN
> 
> Hello, I would like some advice regarding a Cisco PIX 515e.
> 
> I am trying to allow road warriors to get access to the inside LAN, 
> using the Cisco client (tried versions 4.0.5 and 4.6).
> 
> I am able to get the IP for client/dns/wins but I cannot ping or 
> anything else, it just won't work.
> 
> this PIX is used as a gateway and does NAT for the internal LAN, also 
> it connects to a remote PIX via pre-share keys, that works just fine.
> 
> pertinent config follows:
> 
> access-list ipsec-remote permit ip 10.159.1.0 255.255.255.0 10.0.0.0 
> 255.0.0.0 access-list ipsec-remote permit ip 10.159.1.0 255.255.255.0 
> 192.168.0.0 255.255.0.0 access-list nonat-inside permit ip 10.159.1.0 
> 255.255.255.0 10.0.0.0 255.0.0.0 access-list nonat-inside permit ip 
> 10.159.1.0 255.255.255.0 192.168.0.0 255.255.0.0 access-list 
> nonat-inside permit ip 10.159.1.0 255.255.255.0 10.159.2.0 
> 255.255.255.0 access-list ipsec-road permit ip 10.159.1.0 
> 255.255.255.0 10.159.2.0 255.255.255.0 access-list 
> outside_cryptomap_dyn_20 permit ip any 10.159.2.0 255.255.255.0
> 
> ip local pool ippool1 10.159.2.2-10.159.2.253
> 
> global (outside) 10 interface
> nat (inside) 0 access-list nonat-inside nat (inside) 10 0.0.0.0 
> 0.0.0.0 dns 0 0 access-group acl_out in interface outside route 
> outside 0.0.0.0 0.0.0.0 ext.gw.ip.here 1
> 
> sysopt connection permit-ipsec
> crypto ipsec transform-set remote esp-3des esp-md5-hmac crypto ipsec 
> security-association lifetime seconds 5000 crypto dynamic-map 
> outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto 
> dynamic-map outside_dyn_map 20 set transform-set remote crypto map 
> remote 10 ipsec-isakmp crypto map remote 10 match address ipsec-remote 
> crypto map remote 10 set peer *.*.91.112 crypto map remote 10 set 
> transform-set remote crypto map remote 65535 ipsec-isakmp dynamic 
> outside_dyn_map crypto map remote interface outside
> 
> isakmp enable outside
> isakmp key ******** address *.*.91.112 netmask 255.255.255.255 isakmp 
> identity address isakmp policy 10 authentication pre-share isakmp 
> policy 10 encryption 3des isakmp policy 10 hash md5 isakmp policy 10 
> group 2 isakmp policy 10 lifetime 5000
> 
> vpngroup road address-pool ippool1
> vpngroup road dns-server 10.159.1.1 10.159.1.4 vpngroup road 
> wins-server 10.159.1.2 vpngroup road default-domain bla.com vpngroup 
> road idle-time 1800 vpngroup road password ********
> 
> Any hints?
> 
> 
> Thanks,
> 
> Alvaro
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
>

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/