[c-nsp] Cisco 3750G-48TS Stacked Switch problems

[Robert Holtz]

Just for clarification: we're using the WS-3750G-48TS-S switches. 
These are the 1U units that have 48 ports of gb copper and four gb
fiber uplinks.  There are no additional modules outside of GBICs.

Ours are also L2 only.  Mainly L2 multicast traffic.

The only requirement outside of stock ip services is the crypto stuff for SSH.


On 7/22/05, Saku Ytti <saku at ytti.fi> wrote:
> On (2005-07-22 13:06 -0500), Robert Holtz wrote:
> 
> > Cisco is the one which pointed us towards the current image we're using.
> 
>  Then they made error. You are running 3750, right? Not the NM-module?
> If you had used the *.tar files, your 3750 would have said to you, that the
> platform doesn't support the image.
> 
> > Do you have the full IOS image name that you're using?
> 
>  Most (>100) of my 3750's are running 12.2(25)SE, but that's already
> deprecated, those boxes are pure L2. My L3 stacks are running 12.2(25)SEA,
> as it's first image that had IPv6 support which I need. SEC was released
> yesterday, and if I had to upgrade any of those today I'd select SEC or
> SEB2. So:
> 
> c3750-advipservicesk9-tar.122-25.SEC.tar (IP Services + IPv6)
> c3750-ipservicesk9-tar.122-25.SEC.tar    (IP Base + BGP, OSPF, Multicast
>                                           routing, ECMP routing etc)
> c3750-ipbasek9-tar.122-25.SEC.tar
> 
> 
> Or SEB2.
> 
> --
>   ++ytti
>