[c-nsp] Capture WAN Interfaces

[Rodney Dunn]

You mean duplicate and forward to sniff or to reroute (ie:
policy based routing)?

On Wed, Jul 27, 2005 at 10:12:05AM -0500, Cheung, Rick wrote:
> 
> 	I seem to recall a feature in the new releases, >= 12.3, where
> you can capture packets sent/received off a serial interface, and switch
> it to a connected FE interface. I don't recall the name, which makes
> searching difficult. I don't believe its ERSpan...does anyone know?
> 
> 
> 
> Thanks,
> Rick Cheung
> 
> 
> This message, including any attachments, contains confidential information intended for a specific
> individual and purpose and is protected by law. If you are not the intended recipient, please contact
> sender immediately by reply e-mail and destroy all copies.
> You are hereby notified that any disclosure, copying, or distribution of this message, or the taking
> of any action based on it, is strictly prohibited.
> 
> WARNING: Computer viruses can be transmitted via email. The recipient should check this email
> and any attachments for the presence of viruses. The sender accepts no liability for any damage
> caused by any virus transmitted by this email. E-mail transmission cannot be guaranteed
> to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive
> late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors
> or omissions in the contents of this message, which arise as a result of e-mail transmission.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/