[c-nsp] Load-balancing T1s on a Cisco 7600

[Rodney Dunn]

Not that I know of.

On Wed, Jul 27, 2005 at 12:06:06PM -0400, Jon Lewis wrote:
> On Wed, 27 Jul 2005, Rodney Dunn wrote:
> 
> > Try it at the global config level.
> >
> > You are under  a subinterface configuration.
> >
> > The global change sets how the hardware forwards
> > packets (ie: default is a src/dst ip hash) over equal
> > cost links.
> >
> > full uses the L4 ports as part of the hash so if you
> > have a lot of traffic between two of the same ip addresses
> > but running on different ports you can have them hash over
> > different links which results in better load distribution.
> 
> Is changing mls flow known to / supposed to require a reboot to take 
> effect?
> 
> ----------------------------------------------------------------------
>   Jon Lewis                   |  I route
>   Senior Network Engineer     |  therefore you are
>   Atlantic Net                | 
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________