[c-nsp] large scale NAT/PAT solution

[Arie Vayner]

Hi

I have seen several large-scale NAT solutions using the CSM module in
the 6500/7600.
It is possible to split the load between several such modules, and
each can support 10,000's of concurrent sessions, and around 3Gbps of
throughput

Arie

On 6/8/05, Goran Gajic <ggajic at sbb.co.yu> wrote:
> 
> Hi,
> 
> I currently have something like 7000 users that are NAT-ed/PAT-ed (depending on
> their service) through 7206vxr (NPE-G1) box running IOS 12.4.It has something
> like 40k NAT enteries and CPU usage of 75%. However I'm looking for long term
> solution that would be able to NAT/PAT something like 40-50k users (20-30
> ubr7246 aggregated into one point where NAT box (or nat boxes) would be). What
> would be  recommended solution for this scenario? I was thinking about 7609
> box.  Note however that I can't run only NAT or PAT because of service policy.
> Thanks in advanced.
> 
> Regards,
> Goran Gajic
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>