[c-nsp] rj45 terminal servers

[Eric]

Hi,

You need a multiport serial card.  There are a bunch of vendors out there
that make them, like Moxa, for example.

  http://www.moxa.com/product/Multiport_Serial_Boards.htm

Double check if the device you're looking at is support in linux or the
vendor provides drivers for it.  No idea on the price.. you may be better
off with the 2511.


- Eric



On Thu, 9 Jun 2005 16:51:55 +0200
Kim Onnel <karim.adel at gmail.com> wrote:

> well i heard that it can be done with a cheap linux box with some PCI card 
> that does the job, any ideas ?
> 
> On 6/9/05, Loc Pham <loc.pham at comcast.net> wrote:
> > 
> > IMHO, the 2511 is a no brainer : less than $200 bucks.
> > lP.
> > 
> > 
> > > I was wondering what is the cheapest way to build a terminal server ?
> > >
> > > On 6/8/05, noc-ops <aptgetd at gmail.com> wrote:
> > > >
> > > > Hi,
> > > >
> > > > Does anyone know the 2600 model number that can be used with a rj45
> > > > interface module (?) as opposed to an octopus cable?
> > > >
> > > > Any pointers will be appreciated.
> > > >
> > > >
> > > > regards,
> > > > /vicky
> > > >
> > > > _______________________________________________
> > > > cisco-nsp mailing list cisco-nsp at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > > >
> > > _______________________________________________
> > > cisco-nsp mailing list cisco-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>