[c-nsp] 6509 to 3550

[Michael Smith]

Did you try "speed nonegotiate" or "no speed nonegotiate" on the 3550?

Mike

On Jun 12, 2005, at 1:48 PM, Arturo Servin wrote:

> drobinson wrote:
>
>
>> Hi guys -
>>
>> I'm looking to fiber connect a 3550 to a 6509 (native ios), no  
>> trunking. The link doesnt seem to be coming up... I have gig0/10  
>> on the 3550 configured as an access port, and I have disabled  
>> dot1q on the 6509's 4/9 port to which I have the two switches  
>> linked. Im just looking to use the 6509 as a default gateway for  
>> VLAN 75 traffic originating from the 3550. Probably more info than  
>> you need, but do you have any quick troubleshooting tips that I  
>> might try?
>>
>> TIA
>>
>> -Dave
>>
>>
>>
>>
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>>
>>
>>
>     Fibers OK (tx - rx, rx - tx). Crossover cable?
>
>     A show int would be nice to see what is the problem
>
> -as
>
> -- 
>
> Remote Config, The Remote Configuration Company
> http://www.remoteconfig.net
> Global Service Offices
> contact at remoteconfig.net
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>