[c-nsp] 6509 to 3550

[Arturo Servin]

drobinson wrote:

>Hi guys -
>
>I'm looking to fiber connect a 3550 to a 6509 (native ios), no trunking. The link doesnt seem to be coming up... I have gig0/10 on the 3550 configured as an access port, and I have disabled dot1q on the 6509's 4/9 port to which I have the two switches linked. Im just looking to use the 6509 as a default gateway for VLAN 75 traffic originating from the 3550. Probably more info than you need, but do you have any quick troubleshooting tips that I might try? 
>
>TIA
>
>-Dave
>
>
>
>
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>  
>
    Fibers OK (tx - rx, rx - tx). Crossover cable?

    A show int would be nice to see what is the problem

-as

-- 

Remote Config, The Remote Configuration Company
http://www.remoteconfig.net
Global Service Offices
contact at remoteconfig.net