[c-nsp] vlan, trunk and catalyst

[Ueli Heuer]

Hi

> I have an ethernet link with my telco that I want to terminate on a cisco
> 26, this link has 2 vlan, 10 and 11. My router is connected on a catalyst
> 3550EMI, I can terminate the vlans with the catalyst w/o problems, but when
> I try to terminate them on the 26, vlan 3 is ok but no success for 10 & 11.
> I can ping Vlan 3 but nothing in vlan 10 & 11, both interface fa0/0,
> fa0/0.3, fa0/0.10, fa0/0.11 are up.
> What's wrong please ?

are the VLAN 10, 11 defined on the switch? 
what does `show vlan` show on the switch? 


Ueli