[c-nsp] vlan, trunk and catalyst

[Alain Cocconi]

Here is the show vlan on the swith, and vlans 10 & 11 are not defined on it

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/4, Fa0/7, Fa0/8, 
Fa0/11, Fa0/12, Fa0/14, Fa0/15, Fa0/16, Fa0/17, Fa0/19, Fa0/20, Fa0/22
                                                 Fa0/23, Fa0/24, Fa0/28, 
Fa0/30, Fa0/32, Fa0/38, Fa0/42, Fa0/46, Gi0/1, Gi0/2
2    VLAN0002                         active    Fa0/9, Fa0/10, Fa0/13, 
Fa0/18, Fa0/25, Fa0/26, Fa0/31, Fa0/33, Fa0/36
3    VLAN0003                         active    Fa0/2, Fa0/21, Fa0/29, 
Fa0/35, Fa0/44, Fa0/47,Fa0/48
4    VLAN0004                         active    Fa0/37, Fa0/45
5    VLAN0005                         active    Fa0/5, Fa0/6
6    VLAN0006                         active    Fa0/39, Fa0/40
7    VLAN0007                         active    Fa0/34
23   VLAN0023                         active    Fa0/27, Fa0/41, Fa0/43
1002 fddi-default                     act/unsup
1003 token-ring-default               act/unsup
1004 fddinet-default                  act/unsup
1005 trnet-default                    act/unsup

VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1    enet  100001     1500  -      -      -        -    -        0      0
2    enet  100002     1500  -      -      -        -    -        0      0
3    enet  100003     1500  -      -      -        -    -        0      0
4    enet  100004     1500  -      -      -        -    -        0      0
5    enet  100005     1500  -      -      -        -    -        0      0
6    enet  100006     1500  -      -      -        -    -        0      0
7    enet  100007     1500  -      -      -        -    -        0      0
23   enet  100023     1500  -      -      -        -    -        0      0
1002 fddi  101002     1500  -      -      -        -    -        0      0
1003 tr    101003     1500  -      -      -        -    -        0      0
1004 fdnet 101004     1500  -      -      -        ieee -        0      0
1005 trnet 101005     1500  -      -      -        ibm  -        0      0

Remote SPAN VLANs
------------------------------------------------------------------------------


Primary Secondary Type              Ports
------- --------- ----------------- ------------------------------------------


A 23:56 16/06/2005 +0200, Ueli Heuer a écrit :
>Hi
>
> > I have an ethernet link with my telco that I want to terminate on a cisco
> > 26, this link has 2 vlan, 10 and 11. My router is connected on a catalyst
> > 3550EMI, I can terminate the vlans with the catalyst w/o problems, but when
> > I try to terminate them on the 26, vlan 3 is ok but no success for 10 & 11.
> > I can ping Vlan 3 but nothing in vlan 10 & 11, both interface fa0/0,
> > fa0/0.3, fa0/0.10, fa0/0.11 are up.
> > What's wrong please ?
>
>are the VLAN 10, 11 defined on the switch?
>what does `show vlan` show on the switch?
>
>
>Ueli
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/