AW: [c-nsp] Limiting incoming rate on Catalyst6509

[Michel Renfer]

Hi Joe
 
What do you see when entering the command 'sh policy-map interface gX/Y' ?
 
cheers,
michel

________________________________

Von: cisco-nsp-bounces at puck.nether.net im Auftrag von Joe Shen
Gesendet: Fr 17.06.2005 08:45
An: cisco-nsp at puck.nether.net
Betreff: [c-nsp] Limiting incoming rate on Catalyst6509



Hi,


I'm trying to  limit incoming bit rate on GE of
Catalyst6509. What I want to achive is to limit
incoming bit rate to 300Mbps while permitting 350Mbps
burst rate.  I do the following configuration on
Catalyst6509:

mls qos

mls qos aggregate-policer 300M-test 300000000 150000
150000 conform-action transmit exceed-action drop

access-list 101 permit ip any any

class-map match-all 300M-test
  match access-group 101
 
policy-map 300M-test   # this is for ingress traffic
policing
  class 300M-test
    police aggregate shidao

After applying above policy to one of GE interface, I
noticed the incoming rate could be 400Mbps. Is there
any parameter misconfigured?

thanks in advance

Joe

__________________________________________________
???????????????
http://cn.mail.yahoo.com
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/