回复： Re: [c-nsp] Limiting incoming rate on Catalyst6509

[Joe Shen]

> if you are trying to limit traffic just from one
> port, you can also
> rewrite the policy-map config as:
> --------------------------------------
> policy-map 300m-test
> class 300m-test
> police 300M-test 300000000 150000 150000
> conform-action transmit
> exceed-action drop
> --------------------------------------
> this may be more appropriate because if you apply
> the policy that uses a
> named aggregate-policer on 2 or more ports it`ll
> apply to combined
> traffic from those ports ( on a per PFC/DFC bases).
> 

The policy 'shidao' is just a same policy as
300M-test. 

On the other hand, although I applied aggregate
policer 'shidao' on two GE each of the interfaces
could receive at 400Mbps!  

why?

Joe



__________________________________________________
赶快注册雅虎超大容量免费邮箱?
http://cn.mail.yahoo.com