[c-nsp] 12V DC input on 2950

[tfishus]

You must feed it with 12V DC. 

----- Original Message ----- 
From: "Nathan Ward" <cisconsp at daork.net>
To: <cisco-nsp at puck.nether.net>
Sent: Thursday, June 23, 2005 6:01 AM
Subject: [c-nsp] 12V DC input on 2950


> We're trying to mount a 2950 in a vehicle as a mobile lab for testing our
> wireless network.
> 
> There is a 12VDC marking on the back of the chassis next to a plug, which
> I understand is for the Cisco RPS chassis to connect in.
> 
> We've found the pinout for the connector, and it mentions -48VDC on some
> pins and 12VDC on others.
> Does anyone know if the -48 is required? Or can we just feed it 12VDC on
> the pins marked for it?
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>