[c-nsp] 12V DC input on 2950

Sam Crooks sam.a.crooks at gmail.com
Wed Jun 22 22:57:33 EDT 2005


You might look at 2955-12T which is a 24VDC powered switch with 12 10/100
ports and 2 GE uplinks.



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Nathan Ward
Sent: Wednesday, June 22, 2005 3:02 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 12V DC input on 2950

We're trying to mount a 2950 in a vehicle as a mobile lab for testing our
wireless network.

There is a 12VDC marking on the back of the chassis next to a plug, which
I understand is for the Cisco RPS chassis to connect in.

We've found the pinout for the connector, and it mentions -48VDC on some
pins and 12VDC on others.
Does anyone know if the -48 is required? Or can we just feed it 12VDC on
the pins marked for it?


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list