[c-nsp] GBIC not detected on WS-X6748-SFP

[Kristofer Sigurdsson]

Hi,

Michael Smith, Sat, Jun 25, 2005 at 03:28:18PM -0700 :
> Different systems may have different EPROMS on interface modules they  
> will allow.  Try issuing this command from a global config:
> 
> no errdisable detect cause gbic-invalid
> 
> and see if that allows it to be seen.

Also, you could try to push it better in.  Seriously.  I tried to
get a Cat2970 (my first time with SFPs) to accept SFPs for days before
I found out you just have to push them really well.  Same goes for
Cat2940 (expirience from the 2970; only took me 10 minutes there :)).

On the Cat3750's, however, they "click" into place, so this is not an
issue there.

-- 
Kristófer Sigurðsson         | Tel: +354 525 4103 / MSN: ks at rhi.hi.is
Netsérfr./Network specialist | Reiknistofnun HÍ/University of Iceland