[c-nsp] pw over pos interface

[manomugdha biswas]

Hi All,
  I am trying to establish pseudowire over POS
interface (PE interface) of cisco router (7200) and
  ethernet as CE interface. I can establish pseudowire
  over ethernet interface (PE interface) of cisco
router and ethernet/pos/atm as CE interface. But when
I am using POS as PE interface on cisco router I am
getting the following error:
                                                      
                         
  LFIB entry untagged
  Output interface: unknown, imposed label stack {}
                                                      
                         
 Initially I got the same error for ethernet as PE
interface. I removed that error in the following way:
                                                      
                         
 lets consider the following topology
                                                      
                         
 CE-----PE1-------P--------PE2---------CE
                                                      
                         
 say I want to establish PW between PE1 and PE2 and
PE1
is cisco router. My application is acting as P. After
 getting the above error I advertised that for PE2, P
 (my applications address) is the next hop just after
the basic LDP session between PE1 and P got
established. I am doing the same thing here but PW is
not coming up on cisco router!

is there any pos specific configuration on cisco
router that i need to configure?                    
                                                      
     
Any pointer will be highly appreciated.
                                                      
                         
Regards,
Manomugdha

Manomugdha Biswas


		
__________________________________________________________
How much free photo storage do you get? Store your friends 'n family snaps for FREE with Yahoo! Photos http://in.photos.yahoo.com