[c-nsp] Problems booting NPE-G1

[Justin M. Streiner]

On Tue, 28 Jun 2005, andrew2 at one.net wrote:

> We're in the process of upgrading our 7204VXR NPE-300's to NPE-G1's.
> For stability's sake it seemed like a good idea to continue to use the
> same IOS image that has already proven stable for our linecard and
> configuration needs.  We're currently using c7200-is-mz.121-19.bin on
> our NPE-300's with nary a problem.  So, I TFTP'd that image over to one
> of the new VXR's and when I try to boot with that image, I get the
> sequence pasted in below.  A bit of googling hasn't turned up much.  Am
> I doing something wrong, or do I need a different image for the G1's?

I think only 12.1E supports the NPE-G1 - the image you're trying to run 
looks like 12.1, not 12.1E.  Support is more widely available in 12.2 and
beyond.

jms